New track car project.
So as much as I enjoyed the Monda for the past two years I’ve come across a good deal on an s2000 that I’m going to slowly make into a track car. When I say slowly I mean over the winter it should be somewhat ready for some basic lapping days. The Monda will be parted out and sold and I already have an interested party on the modified subframes to fit the F20. Go figure :p
Some of it will be parted out and posted up in the next couple weeks. Will be looking for a hard dog roll bar and hard top to start. I already have some of the parts needed to start the build |
Ah so you grabbed that one! I saw it on kijiji, probably went into the best hands possible considering it appeared to be in rough shape, looking forward to the outcome!
|
awesome Nick! I cant wait to see what this car looks like 6 months from now
|
Yeah I’ve seen this car a couple times and every time it was overpriced. The price on the car was decent to make the move to this platform.
|
I'm interested in those hoops behind the headrests. We talked about them at the dyno day. The clips are all broken on mine.
That's assuming they will be avail..lol |
Originally Posted by jaymz
(Post 24373286)
I'm interested in those hoops behind the headrests. We talked about them at the dyno day. The clips are all broken on mine.
That's assuming they will be avail..lol |
Are they all your s2ks??
|
Originally Posted by Suzuka_Snisen
(Post 24373349)
Are they all your s2ks??
|
This should be fun.
|
Red Top Racecar, I remember his post and negotiated a deal and passed. This car will be properly reborn now with Nick, I would have just used it for parts. Looking forward to the build. :tipwink:
|
Love it man! Jealous.
Ive been toying with the idea of finding a sub $8,000 S2K to build into a gutted racer. |
Originally Posted by Spoon Fed
(Post 24373646)
Love it man! Jealous.
Ive been toying with the idea of finding a sub $8,000 S2K to build into a gutted racer. |
Originally Posted by Spoon Fed
(Post 24373646)
Love it man! Jealous.
Ive been toying with the idea of finding a sub $8,000 S2K to build into a gutted racer. |
Originally Posted by starchland
(Post 24373670)
there was a yellow one, irreparable on kijeej
|
Interior is removed and not too much that can be salvaged. Almost every part has deep scratches so not worth much. https://cimg6.ibsrv.net/gimg/www.s2k...b15dc87e0.jpeg |
What’s the back story on that one? Just abused?
|
nice project I was looking at this car on kajiji, does it have any black carpets or fender liners youd part with?
|
Originally Posted by haga888
(Post 24375666)
What’s the back story on that one? Just abused?
|
Originally Posted by Royaltrophy
(Post 24375689)
nice project I was looking at this car on kajiji, does it have any black carpets or fender liners youd part with?
|
Sounds like you got a nice winter project.
|
Yeah lots to do. Might also have a few other projects to do over the winter so this one might be pushed off till spring :(
Originally Posted by d1000rr
(Post 24375810)
Sounds like you got a nice winter project.
|
This will be interesting to follow and to see the finished product On Track.
|
Removed the dash to get all of the dead weight out.
https://cimg6.ibsrv.net/gimg/www.s2k...fc52a1c93.jpeg |
going to put an aftermarket cluster in?
|
Looking forward to checking in on the new track build this winter and getting my S2000 fix while mine is tucked away
|
Originally Posted by s2kdarren
(Post 24376571)
going to put an aftermarket cluster in?
|
Get rid of those door cards while you're at it.... You should weigh all the crap you've taken out minus the stuff that's going back in
|
Originally Posted by kryptonite
(Post 24376812)
Get rid of those door cards while you're at it.... You should weigh all the crap you've taken out minus the stuff that's going back in
|
https://cimg8.ibsrv.net/gimg/www.s2k...02c79debe4.jpg
No Windshield - No Hardtop = Less Weight & Less Money |
https://cimg3.ibsrv.net/gimg/www.s2k...f03db7356c.jpg
Just trying to save you money. |
^^^ LOL John! :LOL:
|
John, you're crackin' me up here.
Super pics! Ugly as hell cars, but probably fast. Not sure it's Nick's style.... :tipwink: |
Why cut the windshield for weight reduction when I can just add more power!
More progress on the weight reduction. The dash is going back in to eventually compete. I’d say it’s less than 10lbs. I’ll have to weight it https://cimg4.ibsrv.net/gimg/www.s2k...a22f3f000.jpeg https://cimg2.ibsrv.net/gimg/www.s2k...a2ff7b8fa.jpeg |
if it's only 10lbs, you could start shaving some of the mounting tabs. grams eventually add up to kg's!
|
:rockon:
|
pssst....selling an engine harness and front subframe?
like you i'm basically building an S2000 from scratch these days. |
Originally Posted by clubhopper
(Post 24378642)
pssst....selling an engine harness and front subframe?
like you i'm basically building an S2000 from scratch these days. |
|
SUBSCRIBED!!! good call on this project:rockon:
|
Haven’t had much time to make any progress on the build. Been busy putting the Monda f20 engine into this beast for a friend.
https://cimg1.ibsrv.net/gimg/www.s2k...297541287.jpeg |
Exocet?
|
Originally Posted by starchland
(Post 24398743)
Exocet?
|
Started some work on a Js wing i got for a good deal. Little bit more repair work and shes good as new.
https://cimg7.ibsrv.net/gimg/www.s2k...233bc222e.jpeg https://cimg2.ibsrv.net/gimg/www.s2k...0ddf2183b.jpeg https://cimg9.ibsrv.net/gimg/www.s2k...c061ee896.jpeg |
Thats dope. Going to haul ass
|
|
|
Valve cover paint was in rough shape. First time using the VHT wrinkle paint. Turned out pretty good.
https://cimg1.ibsrv.net/gimg/www.s2k...73a25a7d4.jpeg |
Nice.
I tried working on my car lastnight and my garage was so cold I gave up in 5 minutes... |
Originally Posted by myflys2k
(Post 24402651)
Valve cover paint was in rough shape. First time using the VHT wrinkle paint. Turned out pretty good.
https://cimg1.ibsrv.net/gimg/www.s2k...73a25a7d4.jpeg How many cans did it take? Did you heat it with the kitchen oven, or use a heat gun? darcy |
Not even half of a can and I put it in the oven. Probably best to do it in the summer and when the wife isn’t home because the smell from it is horrible. :p open all the windows in your house when you do it.
|
did you have to remove the seals around the spark plug holes before putting this in the oven? what was the temp you used and how long did you leave it in the oven?
looks great nice work. |
Originally Posted by Royaltrophy
(Post 24403171)
did you have to remove the seals around the spark plug holes before putting this in the oven? what was the temp you used and how long did you leave it in the oven?
looks great nice work. |
|
Originally Posted by myflys2k
(Post 24404319)
Every little bit helps.
Should you be as OCD as I am, and want to but the rigidity back in those panels, these guys offer individual dimple dies. Awesome quality and made in Canada. I have many of them and have had great success using them in blind holes with a nut and bolt; as they are hollow. https://www.tmrcustoms.com/ca/tools/...es/dimple-dies |
Originally Posted by Spoon Fed
(Post 24404997)
Good stuff! Grams add up to kilograms. There is no substitute for weight loss.
Should you be as OCD as I am, and want to but the rigidity back in those panels, these guys offer individual dimple dies. Awesome quality and made in Canada. I have many of them and have had great success using them in blind holes with a nut and bolt; as they are hollow. https://www.tmrcustoms.com/ca/tools/...es/dimple-dies theres little to no structural rigidity in the inner door sheet metal. The reinforcement bars are still intact. I am planning to get a dimple die set though for other parts of the car. |
:duh:, LOL but every pound counts. Dimple dies could be challenging in certain areas.
Nice project Nick. :bow: |
Nice! Glad to see I'm not the only one building a GPW AP1 this year
|
|
Things are slowly progressing on the track build as parts roll in and the other project Exocet come to an end. RSG Mugen Rep and roll bar. Soon to be permanent installled. Might hold off on paint for a season to see what I want for wheel clearance and possibly upgrade to different wheels. Cylinder head is going to the shop this week for a refresh and then I’ll assemble it and get it ready for install. https://cimg5.ibsrv.net/gimg/www.s2k...43c443c7b.jpeghttps://cimg6.ibsrv.net/gimg/www.s2k...cd603d748.jpeg |
Oh boy! We're gonna have some fun this year!
|
Finally time to get to my build. Some progress. https://cimg2.ibsrv.net/gimg/www.s2k...afab7d567.jpeghttps://cimg3.ibsrv.net/gimg/www.s2k...26e7b3433.jpeg https://cimg4.ibsrv.net/gimg/www.s2k...0b74bbca8.jpeg |
Looks fantastic man!
|
:thumbup: looking good.
|
Nick, could you post these and any update pictures on The BEND Track Nights Facebook page? Looks great. Love those white S2000s.
|
Originally Posted by ElliotCanada
(Post 24426338)
Nick, could you post these and any update pictures on The BEND Track Nights Facebook page? Looks great. Love those white S2000s.
|
nice clean up inside there. looking good indeed. keep on doin.
|
:bump: for updates
|
Not too much progress lately. Dash and engine management is in. Waiting for the engine to show up. Might be another 3 weeks or so https://cimg1.ibsrv.net/gimg/www.s2k...1aacfe539.jpeghttps://cimg2.ibsrv.net/gimg/www.s2k...bc907aad5.jpeg |
Cool, what's being done to the motor? Care to share???
|
Originally Posted by hawkman199
(Post 24453886)
Cool, what's being done to the motor? Care to share???
|
Originally Posted by myflys2k
(Post 24453889)
yeah since the engine that I acquired for the track car has been sold to a fellow member I decided to go ahead with an in-line pro build. Going with an in-line pro 2.4L 11:1 compression and then vortech supercharging it :p Love the project Nick. |
Originally Posted by myflys2k
(Post 24453889)
yeah since the engine that I acquired for the track car has been sold to a fellow member I decided to go ahead with an in-line pro build. Going with an in-line pro 2.4L 11:1 compression and then vortech supercharging it :p |
Thanks guys. Ill update when the engine shows up! |
Some progress. Should have it started in a week or two https://cimg7.ibsrv.net/gimg/www.s2k...1681eec10.jpeghttps://cimg9.ibsrv.net/gimg/www.s2k...c72189d42.jpeg https://cimg3.ibsrv.net/gimg/www.s2k...f957c6d77.jpeg https://cimg6.ibsrv.net/gimg/www.s2k...703780e7e.jpeg https://cimg6.ibsrv.net/gimg/www.s2k...8375a2102.jpeg https://cimg0.ibsrv.net/gimg/www.s2k...c15a4ffec.jpeg |
|
All times are GMT -8. The time now is 11:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands