FS: Custom S-Tai style led DRLs
 

Hey guys,

I've been getting a lot of compliments and interest in my led's, which I don't mind making. Theyre brighter than the j's racing leds and are pretty low key when off. Ill try n post some pics up this weekend.
If this goes I'll do them for $75 (black) a pair w/ wiring and a switch.

Each kit will come with:
-A pair of LED fogs and brackets
-Sufficient wires and connectors needed for a clean install (whether it be tapping the headlamps, or running a switch under the steering wheel)
-An on/off switch with an red "on" light
-All hardware needed for the install (may vary depending on preference)
-Detailed instructions


Shoot me a pm if interested with what bumper, and where you prefer tap your power source.


cheers

J


Here's pic of my latest set i made for thensx:
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png


https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

UPDATE: snapped some new pics of one I made today.

https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

off
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

Top View
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

Front View
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

Side Profile
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png


Happy Campers

Berlina Black (weedamese)
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

in..

gg. lemme see.

you'll get your pics tmrw mr.Chaplin

thank you,
just wanted to show my support : )

;) thanks a mil

interested

: ) btw its chopin (show-pan) after the great pianist frederic chopin.

Interested

Any daytime pics?

I know a buddie taht might be interested and that'll be your 5th one!! Letsa geta making em :p ...

On a side note, still kinda sux that yoru selling your car!

@ charlie - lol sorry man when ever i see your name charlie chaplin just pops in my head

@ dave - sounds good, but we still gotta do a cruise man, lets set that up sometime, and

I guess whoever wants to see the lights in person can tag along. Maybe st. louis beer & wings?

Ill try n snap some pics today. As well, so I can get started, Did everyone want black background or white? Ill show examples of what I mean via the pics later anywho.

J

ill have my car on the road in 2 weeks lol..how long does it take to make

This is a pic i found of "white background" off during the day, still pretty low key. :)
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

Heres a pic of indoor daytime
https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

Some more detailed pics soon to come, weekend lagg :S

As for how long it will take, I'm waiting 'til the end of the weekend to see roughly how many I need to make. If there are 10 people for instance (almost there), then they will probably be done by next weekend tops. Just post if you guys prefer the black or the white background

Black will be $75
White will be $60
I make them 6" long (seems to look the best on most bumpers and is about the length of the j's), but you can give me a custom length to your preference as well.

thanks guys.

J

white!

Looks nice.
I"m interested in the white one.

BTW How do you attach it to the lip?

i'll take a set just tell me who to pay

PM your numbers and preference (length, colour).

Ok so for those who want the black background it will be about a week n a half

For those who would like the white ones I could probably finish them by the end of the week.

If interested, send me a pm or text 4168308315 and I'll make a list in order of who comes in contact with me first.

Thanks

J

Update: snapped some new pics of one I made today, lookin good.

Think you can snap a shot of the leds off?

there you go ^ :)

so, for the black ones....
the board will be black where the pic shows the white, correct?
are they sealed? any chance of problems in the rain?

https://www.s2ki.com/forums/index.ph...age&img=707480

correct, those are the white boards, as for problems in the wet they are waterproof.

thanks

thank you boss man i'll send it to him now :thumbup:

okie dokie

looks good.

Thanks. Besides weedamese, fenix, and chngster who else wants white?

I want a set! White is good

sure, I'm just waiting on the black sets. I'll have all the white ones done by this friday. btw what car are you putting it on?

PM me your phone number and preferences so I can keep track of it.

thanks

new pics of recent install on weedamese's bb

you said you would mark off my license plate you jerk off. lol jp i dont care

I'm gonna setup my BB with a black set so that its less noticeable.

FYI
I was concerned that I would have to drill this set into my fender, however, this is JVU response:
Nope they weigh next to nothing so I went with 3M 2 way tape as the best option. I'll give you instructions when you pick them up. If you can ask me the same question in my thread incase someone else had the same question. Thank you.

I am in too.

got a set thx johnny

np. Ill keep everyone updated on the when the new ones (black) will be done. ETA probably thursday. Sorry for the lag guys.

hey cheng get that installed and show me some pics!

note: I am going to change the guage of wire that I will be using once again -_-. So the switch doesnt get hot. For those who have grabbed a set off me already, I will take care of the new wiring. thanks!

nice work

2 quick questions if u don't mind

1) are these LED lights mainly for aesthetic purposes or do they also light up the road in a sense for better clarity at night?!

2) how difficult is it to install (the wiring and crap) for a complete noob

thanks in advanced!

How do these mount?

im in for white..

Sorry for the delay.

They mount with 3M 2way tape (best option IMO)

In a sense they do make your car more noticeable at night time but from inside the car the Headlights show more.

Install for a noob isn't too bad, the hardest part is getting the wire through the firewall to the driver footwell. Just take some time to run the wires as clean as you can.

Thanks guys. N I'll let you know when the black ones are done

for those who want the white, contact me as I have them available.

Hey guys sorry for the wait, I finally have black in stock! I can have a couple sets ready for next week, I just need to recap who's been waiting for the black background leds.

cheers.

my buddie :D

Im in for a black set... after all....

Is a black set still reserved for me?
Thanks :D

Yes sir, :thumbup:

you are one of the first on the list.

i still have yet to install lol..

whats with the wait?

3 black background LED sets ready.

pm me.

another pic for reference of a set I made for the NSX

https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

http://i43.photobucket.com/albums/e3...00603-1955.jpg

http://i43.photobucket.com/albums/e3...00603-1955.jpg

for johnny
+1 thanks

love them, thanks jvu

Ooooo that looks nice :)

np guys

newer, brighter diodes of the black background leds

https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

^

get compliments on mine all the time...there are kits out made by companies there...however retail alot more..this is an amazing deal if u ask me!

up

Can you get like a blue light? What I would want to do is put it hidden, and point it down so its a underglow of that open space on the front of the s2.

Basically, I want to light up the front grill part blue. So if I am following someone they see a blue glow under the hood of my car.

lets see more pics of the NSX

asking to get pulled over lol..

Ok.
I'm finally ready to install my LED lights but need some help.

Been so busy that I haven't had any time to go out and enjoy the S.
Anyways, if anyone who has installed it already, can help me on how the wiring should be, I'd appreciate it.

Left LED with long blk and red wire exposed
Right LED with short blk and red wire exposed
Long blk and red wire, one end exposed, other end crimped with adapters
Short red wire, both ends crimped with adapters.
Toggle switch with 3 contacts.

How does this connect up?

Thanks in advance.

pm'd and emailed for white ones

up

How about Knight Rider scanner?

?

How you liking the LED's kookie?

Summer fun over, Making more 4300k (crystal white) sets,

Pm me for info if interested.

J

Like the LED's.
Too bad I still haven't installed it. :confused:
I'm so noobie'ish that I can't even understand the simple instructions you gave me.
If anyone who already has this installed, wouldn't mind me looking at your setup, I'd might finally be able to hook it up.

hmm.
:eek3: 4300k LED's.. are these the same as the original sets? If it is brighter, than I'm interested even though I have not even installed the original set.
What's the cost?
I procrastinate too much. :blah:

Do these fit AP1s by any chance? If anyone has a pic of these installed on the AP1s I'd love to see them (I suspect they can go in the 2 "fog lights" holes)?

They would go in the grill opening.

^^ new batch coming soon

jvu3,

I'm interested in a set of black. Do you do the install? Where r u located? PM the details. Thanks.

I want to get a set of these and run them 24/7 as drl's. Right now I've got my headlights running full-time. I've got a relay to use under dash already. Any idea how to run the wiring from the front bumper to the under dash fuse panel area. I don't want to remove my bumper as my front under spoiler isn't attached overly strong and I'd rather not take it apart. Is there an easy way to fish the wires form the bumper into the engine bay. Do you have any pics of the installation. Thanks for any reply.

Any update in the stock, Jvu3?

Update: hey guys. I have 6 sets ready today which 4 are spoken for. They look real nice. I'll snap some installation photos when I install a set on my Nsx since the installation is relatively the same. Shoot me a pm if interested.

Cheers guys.

pics, pics, pics, pics, can't wait to get mine, pics, pics, pics please, lol.