Mark this thread as Unsold
FS: Mugen MF10, Spoon, Kraftwerks, Downforce, OEM AP2 Stuff, ARP, Ferrea, Voltex, etc
#1
FS: Mugen MF10, Spoon, ARP, Side Strakes, AP Racing BBK, Wilwood BBK, Blue Carpet
Hey all, new to the forums! I'm a long time lurker, but only recently became an S2000 owner. If you need references, I can send you my eBay account or ClubRSX iTrader info (where you can usually find me buying & selling).
Located in Caledon, but also spend a lot of time in Markham.
Sorry if some pricing is off, I'm not fully familiar with what a lot of these parts go for these days. Just let me know if anything interests you!
:: OEM AP2 Front Lower Bumper Grille - $20
Some tabs were shaved on the top and bottom. No clue how it will affect installation, but I'm sure some urethane will do the trick.
PICS
:: OEM Side Strakes -$400 ---> NOW $300
Used, Painted a custom colour, no hardware
PICS
:: Mugen MF10 Wheels - $6500
Square set of 17x9" +42mm Offset (NSX Rear), Bronze. Includes black aluminum valve stems and center caps. Brand new in box, these are from the re-issued batch of 25 sets that were sold last year.
SOLD! SOLD! SOLD!
:: Spoon CR93 Wheels with Yokohama S-Drive Tires - SOLD
:: Downforce Front Splitter for OEM AP2 Front Bumper WITH OEM Lip - SOLD
:: OEM AP2 Front Bumper - SOLD
:: OEM AP2 Front Lip - SOLD
:: Voltex Rear Diffuser - SOLD
:: AEM V2 Water/Methonal Injection Kit - SOLD
:: ARP Extended Wheel Studs - SOLD
:: Ichiba 20mm Spacers (Pair), Set #1 - SOLD
:: Ichiba 20mm Spacers (Pair), Set #2 - SOLD
:: Downforce Front Splitter for OEM AP2 Front Bumper (without OEM Lip) - SOLD
:: Ichiba 15mm Spacers (Pair) - SOLD
:: Craft Square Mirrors - SOLD
:: Invidia Test Pipe - SOLD
:: J's Racing C304 SUS 60RS Dual Stainless Steel Exhaust - SOLD
:: Works Bell RAPFIX II Quick Release - SOLD
:: Downforce Side Splitters - SOLD
:: Goodrich Stainless Steel Braided Brake Lines (Rear) - SOLD
:: Works Bell GTC Quick Tilt - SOLD
:: Key's Racing Steering Wheel - SOLD
:: Kraftwerks Super Charger Kit (will include brand new pulley & belt upgrade) - SOLD
:: Hondata K-Pro V3 w/ all required sensors, AP2 Valve cover, etc. for install on AP1 - SOLD
:: Skunk2 Alpha Series Header - SOLD
:: JL Audio Stealth Box - SOLD
:: Ferrea Valve Train Upgrade Package - SOLD
:: Goodridge Stainless Steel Brake Lines, Rear ONLY - SOLD
:: Project Kics R40 Lug Nuts - SOLD
:: OEM Honda Oil Filter x2 - SOLD
:: OEM Clear Side Markers - SOLD
:: OEM Blue Carpet - SOLD
:: Wilwood Rear Big Brake Kit - SOLD
:: BLOX Stubby Antenna - SOLD
:: AEM Fuel Rail & Pressure Regulator (Black) with Aeromotive Liquid Filled Gauge - SOLD
:: Skunk2 4Bar MAP Sensor - SOLD
:: Spoon Rear Over Fenders - SOLD
:: AP Racing Front Big Brake Kit - SOLD
:: ARP Pro Series Cylinder Head Stud Kit - SOLD
Located in Caledon, but also spend a lot of time in Markham.
Sorry if some pricing is off, I'm not fully familiar with what a lot of these parts go for these days. Just let me know if anything interests you!
:: OEM AP2 Front Lower Bumper Grille - $20
Some tabs were shaved on the top and bottom. No clue how it will affect installation, but I'm sure some urethane will do the trick.
PICS
:: OEM Side Strakes -
Used, Painted a custom colour, no hardware
PICS
:: Mugen MF10 Wheels - $6500
Square set of 17x9" +42mm Offset (NSX Rear), Bronze. Includes black aluminum valve stems and center caps. Brand new in box, these are from the re-issued batch of 25 sets that were sold last year.
SOLD! SOLD! SOLD!
:: Ichiba 20mm Spacers (Pair), Set #2 - SOLD
:: Ichiba 15mm Spacers (Pair) - SOLD
:: Goodrich Stainless Steel Braided Brake Lines (Rear) - SOLD
:: Hondata K-Pro V3 w/ all required sensors, AP2 Valve cover, etc. for install on AP1 - SOLD
:: AEM Fuel Rail & Pressure Regulator (Black) with Aeromotive Liquid Filled Gauge - SOLD
:: Skunk2 4Bar MAP Sensor - SOLD
:: Spoon Rear Over Fenders - SOLD
:: ARP Pro Series Cylinder Head Stud Kit - SOLD
Last edited by VinceTEC; 02-15-2018 at 05:17 PM.
Trending Topics
#8