Alloy Craft fuse box heat shields
 

Alloy Craft's newest release is a replacement heat sheild for your fuse box area. This sheild will replace your stock exhaust manifold heat sheild, as well as add some sheilding to the fuse box and battery area. Our heat sheilds also come standard with a knock out panel for those running engine torque dampers. They are also avaliable without knock out.

If you are intrested in purchasing one you can send payment to

Sales@alloycraft.com

This item is avaliable in 2 versions and both are currently instock.

-------------------------------------------------------------------------------
1. Mirror polished stainless steel, total weight 3 pounds: Retail price $175
Part numbers

Stainless steel with knock out panel for engine torque damper = SSK01
Stainless steel without knock out panel = SS001
------------------------------------------------------------------------------------------------
2. Black powder coated 5052 aluminum, total weight 1.5 pounds: Retail price $130.00
Part numbers

Aluminum with knock out panel for engine torque damper = ALK01
Aluminum without knock out panel = AL001
------------------------------------------------------------------------------------------------

Also for those who are intrested in our radiator cooling plate (shown in pic 4, 5 ). For a limited time, with purchae of a heat sheild, you can add a black one to your order for only $75.00:eek: !!





http://i1009.photobucket.com/albums/...t/CIMG0222.jpg

http://i1009.photobucket.com/albums/...t/CIMG0220.jpg

http://i1009.photobucket.com/albums/...t/CIMG0215.jpg

http://i1009.photobucket.com/albums/...t/CIMG0249.jpg

http://i1009.photobucket.com/albums/...t/CIMG0242.jpg


Pictures of the mirror stainless steel.

http://i1009.photobucket.com/albums/...t/CIMG0506.jpg

http://i1009.photobucket.com/albums/...t/CIMG0498.jpg

http://i1009.photobucket.com/albums/...t/CIMG0543.jpg

http://i1009.photobucket.com/albums/...t/CIMG0516.jpg

if i get a black one, will it have a pre-cut hole? b/c i dont want a hole for my non-existence ETD

As an owner of one of your engine-turned sparkplug covers, I will say you are doing wonderful work. Will the heat shield and the radiator cooling plate be available in engine-turned?

It is avaliable both with snap out plate and without. I will post part numbers tonight so you can order what you want.

Engine turned is available, but is special order only. Unfortunately they are fairly expensive, I will Pm you with pricing tonight.

Is this available in unfinished aluminum? if so can i have a price for heat shield, and cooling plate shipped to 33030 please? Items look GREAT.

Wow this looks awesome. I plan on ordering some of your products soon.

Payment sent for one.

Lets get in on these everybody, these things look great.

Combo deal is tempting...

Actually if you guys can get pics of the mirror polished stainless i'd be very interested in buying one.

Unfortunately I have not made one out of the mirror stainless yet. However, it is the exact same material as the patterned stainless, it just has the mirror finish instead of the little circles. The sheet is kind of expensive so I hoping to get some orders first so I can buy the material.

Ahh okay. Well let me know when you guys get close to the 10 people for the group buy. I really want one, but might need cash until then, so I would rather pay for it when it gets closer to make sure I have enough.

pm price for both

Bump

if your heat shield does away without having to use that major pain in the ass bolt on the inside lower frame rail I'm definitely in for one, I have to reinstall my heatshield and I detest having to use that major pain in the arse slide behind bolt. Looking at your design yours doesn't use that lower frame rail bolt near the firewall. I'll pm you on this.

If that is the case I'll take a patterned stainless steel one like you show in the pictures, you do offer those on this GB right ?. Thanks for any reply.

^ No he does not offer the patterened one, only the polished and black one. ^


I am willing to buy one of the Polished ones you are offering in the group buy but put me on a list of dedicated buyers and i will pay once we have ten.

Okay, I'm in on this as well, stainless version as per my pm's.

By the way can we please get some pictures of the stainless version asap?
And would like to know the qeustion Jfusion asked in regards to mounting.

I got a pm reply on that, this heatshield does not use the lower frame rail bolt near the firewall, which is a big relief. Not having to use that bolt makes it far easier to remove and install. It uses alternate bolt locations that seem to be pretty easy to access and having the piece come apart in sections helps as well. I like the design.

what is engine-turned?

+1 on what is engine turned.

Engine turned is a finish that is mechanicaly applied to metal. It is very labor intensive and expensive. Each sheet that we use to make our parts requires 4000 individual polished circles to be scribed into its surface. It is the finish on the metal in this picture, and the pictures above.

https://cimg3.ibsrv.net/gimg/www.s2k...bd280f57e3.jpg

Wikipedia link

http://en.wikipedia.org/wiki/Engine_turnings

We do offer the engine turned patterend stainless steel, however it is not included in the group buy due to its cost. If you are intrested please pm me for pricing.

as soon as you get back to me with a price for polished stainless shipped to my location, no hole needed for engine damper, I can forward payment, pm me when you have time. thanks again.

Can we start a list of dedicated buyers please?


1. It's2klean - SS001
2. Jfusion - SS001

[QUOTE=it'S2klean,Jan 18 2011, 11:15 AM] Can we start a list of dedicated buyers please?


list added first page!

come on guys lets get some more orders here. This is an awesome product, it appears to be really well designed, and looks great. If anyone has an aftermarket header this is a great mod, keeps the battery protected and is a better heat shield than the oem piece. If you ever have to remove the heatshield this will come off and go back on much easier than the oem piece thanks to the improved design. Can't wait to get mine in place.

Plus it looks great and you cant beat the price!!

Im on that list too :D

Bump

im down for the combo deal, ALK01 for me please.

payment sent

Payment received, thanks for the order.

Bump for edit on list

:iagree:

Can we get black betty on the list, we half way there, bump!!

Do these fit a RHD car?

If not do you want a test pilot? :D

Yes actually I am, pm me if intrested, I will give you the details.

I havent received payment yet. He did send payment for a radiator plate though. I pm'd him but have not heard back yet.

are the current orders being manufactured ?, any idea on estimated shipping ?, thanks for working on this.

I placed the order for parts last week. Parts should be avaliable to ship in 3 or 4 weeks.

thanks for the reply ! :thumbup:

Hey buddy, Max from Heel toe just gave me the heads up that the Ignalls ETD he sold me might not fit this shield, i have the same strut bar is in this picture, but i cannot entirely tell, i think it will be a matter of half an inch if it does not clear, if so ill have it cut, but do you have any idea if this will fit by looking at it.

https://www.s2ki.com/forums/index.ph...age&img=739744

From looking at the pictures I think it should clear ok, but that is just an educated guess. Worst case you might have to grind a little off of the ETD mounting bracket.

Come on guys, 4 more :)

These should ship next week! Im forming the lower parts tomorrow. The tops are scheduled for mid next week.

Cooling plate shipped to the UK plz

PM shipped price


thanks

raz

I just got my PLM header installed and I am interested in the heat shield but would first like to see a pic of the polished shield and what it will look like installed....

He just made an order hopefully be coming in soon, get those pictures up when you can buddy!

Sorry guys small delay in production, the parts just rolled off of the machinery today. Should be painted by early next week with parts shipping soon after.

Here is a pic of the polished stainless lower panel, I dont have a pic of the top part yet, it should be done on monday. It's pretty much a mirror as you can see.

http://i1009.photobucket.com/albums/...w/CIMG0489.jpg

http://i1009.photobucket.com/albums/...w/CIMG0483.jpg

:baby: :baby:

When are we proceeding with buy

:eek3: :eek3:

By the way i really like how you put s2000 on Emblem on your strut bar looks nice :thumbup:

Glad to have you amongst the vendors here man, this looks better than Arc's fuse box cover which is over 300 bucks. You the man!

:thumbup: :iagree:

Just finished forming these, thought you might want see some pics of the polished stainless. I will try to ship all orders by Wednesday. Some will go out tomorrow,... which is only 20 minutes from now, lol.

http://i1009.photobucket.com/albums/...t/CIMG0509.jpg

http://i1009.photobucket.com/albums/...t/CIMG0498.jpg

http://i1009.photobucket.com/albums/...t/CIMG0496.jpg

http://i1009.photobucket.com/albums/...t/CIMG0506.jpg

That .. is... gorgeous..

Any mounted pics, maybe in a berlina?

PM'ed

Great looking heat shield. Payment sent! Will pm with paypal trans id.

Payment received, I shipped your shield out today, thanks for the orders guys.

how much for the polished mirror heatsheild to 02360

i want this exact setup:
https://i1009.photobucket.com/albums...t/CIMG0506.jpg

Let me know the price to get into the group buy with the exact same setup as above. Hopefully the PM system will be fixed and you can PM the price soon.

Price for the heat shield in polished stainless is $160 and for the radiator plate $125, total shipped in the US, for both would $280. I have them in stock and ready to ship.

What about the combo in black? Zip 21044. I've never removed the oem piece, how hard is the infamous lower bolt to get out?

Free shipping inside the us right now so price is $200 shipped. The infamous bolt will require some cussing and possibly busted knuckles to remove, lol.

I am very interested and close to pulling the trigger on the fuse box cover, but I was wondering if there were a way you could add a plate or something to cover the battery as well? The reason for me getting this is because I want to do hood vent mod and not worry about when it rains, as this is my daily driver...I have seen ppl say rain hasn't caused any issues with the vents but its something I want to be sure of...

Im not sure how it would attach to the heat shield. if you wanted you could try to add a panel to the fire wall or off of the fender wall.

Just sent a PM for the Heat shield + Cooling Plate combo In Black Aluminum. Both with out the Logo?

Anyone know if this fits with the greddy turbo kit?

Can anyone confirm if this will fit with an inlinepro stage 1 turbo kit?

I honestly dont know if these will fit with either turbo kit. If you can post some pics of your set ups it would help me get an idea of fittment.

https://img.photobucket.com/albums/v...o/DSC03886.jpg

Just paypal you money for black heat shield with knock out hole and black cooling plate.

https://www.s2ki.com/s2000/gallery/p...089__file__med
So you couldnt make something like this for us? Id take one.

Bump

This is almost exactly what I was wanting!!! You would have 2 buyers already...Looks like an easy add on, similar to the knock out panel for the torque dampener...


Bump
[/quote]

Guys I had a member try to fit one of my heatshields with the Greddy kit, and it wont fit without some pretty major modifications. Ill post some pictures later.

As for the battery cover, I dont know if this would be a good, idea because or the battery terminals. If they accidentaly touched the metal would cause acring and such.