JDM license plate Anglers & f1spec shift knobs $19
 

IF you order from f1spec.com please comment that you heard/ referred by this website(s2ki.com) or I(Ming) was helping you out ,
so i can take care of this order personally and ship it out

http://us.st12.yimg.com/us.st.yimg.c...0_2029_3666363
http://www.wusautogroup.com/knob/DSC01126.JPG
http://www.wusautogroup.com/knob/DSC01128.JPG



- Size M10x1.5 - Honda (All Models) EF, EG, EK, EP3, DA, DC2, DC5, AP1...etc
- Super light weight (3.5 oz)
- Spun polished surface

The material is made out of aluminum, which is the same as the OEM S2000 knob (see pics above).



LIMITED TIME OFFER: $19.99 Shipped within the USA.
(Canada please add $20 more for shipping.)

We prefer PayPal - PayPal ID is sales@f1spec.com
This deal @ $19.99 does not last forever. WHILE SUPPLIES LAST!!

THANK YOU!

Below are pictures from our customers http://images.honda-tech.com/set1/smile/emthup.gif http://images.honda-tech.com/set1/smile/emthup.gif

http://i10.photobucket.com/albums/a1...u/IMG_2072.jpg
http://i16.photobucket.com/albums/b47/Aunz/Newnob.jpg


20 shipped
i only have got a hold of a few of these brackets. get them while i stil have them

Located in San Francisco , Bay area, Price is FIRM..

I have a few of these JDM adjustable license plate brackets. They are adjustable, so you can angle them however you want... angled down, angled up, horizontal, etc. Stop getting pulled over for no front plate, and sport your front plate with this cool license plate bracket!! Simple to install, but requires drilling new holes into either your license plate, or the bracket, due to Japanese plates having different hole patterns. I am asking $20 each with FREE shipping!
http://www.iwishiwascool.com/icecrea...8/DSC_0011.jpg

http://www.iwishiwascool.com/icecrea...8/DSC_0024.jpg

http://www.iwishiwascool.com/icecrea...h/DSC_0016.jpg

and the cleaner looking by zealous only 1 in stock
20 dollars shipped pricing is firm

pictures

http://i10.tinypic.com/4yzz3uf.jpg

http://i14.tinypic.com/68htjld.jpg

Alright guys, here's my quick review:

F1Spec shipped pretty quickly. I ordered on a Saturday and the package arrived five days later.

Out of the box (shift knob in packaging, Ming's card, and a cool lanyard:
http://img206.imageshack.us/img206/5...ckagingtq8.jpg

First impression:
Like a previous member stated, this knob is smaller than the Voodoo magnums (standard size). Whereas the Voodoo is 2" in diameter, this knob is ~1.6" diameter (pretty much identical to the stock shift knobs widest point). NOTE: this knob will feel smaller than your OEM knob, even though the widest diameters are the same. This is due to the design of the knob: sphere vs. cylinder. Also, the lower you screw the knob in, the smaller it'll feel (I know this doesn't make any sense reading it, but you'll get it, when you install it). For owners with larger hands, I would recommend finding someone local to feel the size, before purchasing.

Some height and size comparisons:
http://img101.imageshack.us/img101/9472/oemvs4xh5.jpg

Since the knob is smaller, it is also lighter than the Voodoo (not sure about exact weight measurement, I'll weigh it later). I've heard that countersunk knobs that are light make the shifts feel notchy. For some reason, notchiness-wise, it feels pretty much the same as my Voodoo aluminum knob, even though it is noticeably lighter. Shifts feel short and crisp, just like my Voodoo knob. Perhaps, there isn't a significant weight difference.

The drop distance is also similar to the Voodoo's at around 1 inch. I think the Voodoo actually is countersunk slightly deeper, but the smaller size of the F1Spec knob equals it out. If you compare the OEM knob with the F1Spec, you'll see that just from the knob height itself, you get nearly an inch drop. In conjunction with the F1Spec knob being countersunk, you get a hefty drop in shifter height.

1:
http://img264.imageshack.us/img264/4912/oemvs1xd9.jpg

2:
http://img357.imageshack.us/img357/153/oemvs2dn0.jpg

The flat bottom design of the F1Spec shift knob also lets you utilize the lock collar nut for the stock knob (it sits maybe 2-3 threads higher, after comparing with and without, I ultimately scrapped the lock nut to get it as deeply threaded as possible):
http://img407.imageshack.us/img407/6786/oemvs3ik5.jpg

Some tips before installation:
I would clean the knob thoroughly prior to installation to remove any leftover machining/packaging residue. I used Never Dull, rinsed with warm water, then followed up with some plain 'ol dishwashing soap, then rinsed with warm-hot water. I think it increased the luster a bit, but it could just be in my head. :D

Also, clean out the threads with some hot water and a qtip or something. Sometimes there will be leftover aluminum shavings (albeit not that much). Removing everything prior to installation will ensure a smooth spinnn down.

I haven't driven with the knob yet, but from just a few dry shifts, I can imagine it'll feel pretty much the same as my Voodoo knob. Will update later today.

Overall, it seems like excellent choice for those looking for a bargain countersunk knob. For $20 shipped, you might as well give it a shot!

Hope that helps! :hello:

is there a pick up discount?

18 dolllars picked up

I picked up one of the JDM license brackets to go on the car I just picked up from Kansas City (where they can legally run one plate). I adjusted it so that it helps divert some air into the radiator/air intake. Looks good and it's inexpensive. A hard to find combo for the S2000.

glad you liked the product,
post up some pics whenever you can

=D

any more anglers in stock?

paypal easiest?

yes i do

you can paypal me at sales@f1spec.com
20 dollars
please comment in the payment thats its for the jdm brackets
or order from my website

f1spec.com

location please? and by any chance would this fit a nissan?

these fit all license plates