S2KI Honda S2000 Forums
Page 1 of 15
1
2
3
11
Last »
Show 75 post(s) from this thread on one page

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)
-   Sponsor S2000 Accessory and S2000 Style Deals (https://www.s2ki.com/forums/sponsor-s2000-accessory-s2000-style-deals-187/)
-   -   Moddiction Shifter Extender (https://www.s2ki.com/forums/sponsor-s2000-accessory-s2000-style-deals-187/moddiction-shifter-extender-815193/)

Moddiction 09-08-2010 08:22 AM
Moddiction Shifter Extender
 
Moddiction 3" Aluminum shifter extender.


Offered in a brushed aluminum finish.

Available in 10x1.25,10x1.5 (Honda/Acura) and 12x1.25 thread patterns.

The pricing is set at $24.99. For a limited time receive FREE SHIPPING within the US via USPS First Class Mail.

Also available in Textured Black finish for an extra $10


http://i123.photobucket.com/albums/o...5/DSC_0685.jpg

http://i123.photobucket.com/albums/o...5/DSC_0688.jpg

http://i123.photobucket.com/albums/o...5/DSC_0692.jpg

http://i123.photobucket.com/albums/o...5/DSC_0689.jpg



http://i123.photobucket.com/albums/o...5/DSC_0750.jpg

http://i123.photobucket.com/albums/o...5/DSC_0756.jpg

http://i123.photobucket.com/albums/o...5/DSC_0764.jpg

http://i123.photobucket.com/albums/o...5/DSC_0765.jpg

adrs2k 09-08-2010 10:00 AM
Did you do some testing to decide on the optimal height? I was asking about these a couple months back when I first purchased my shift knob from you. Glad to see you are coming out with something, but 2.5" is a lot.

I guess realistically though, if you screw the moddiction knob to the lowest setting, you might only be around 1 in or so taller than stock height. HMM. What is the depth of the countersunk knob? Trying to figure out the height ranges.

Moddiction 09-08-2010 10:32 AM
Originally Posted by adrs2k,Sep 8 2010, 02:00 PM
Did you do some testing to decide on the optimal height? I was asking about these a couple months back when I first purchased my shift knob from you. Glad to see you are coming out with something, but 2.5" is a lot.

I guess realistically though, if you screw the moddiction knob to the lowest setting, you might only be around 1 in or so taller than stock height. HMM. What is the depth of the countersunk knob? Trying to figure out the height ranges.
Yeah my shift knob is adjustable by quite a bit. So at lowest setting is about 1" shorter than the oem shift knob. The shift knob is drilled out 1.75" deep so really as far as possible without going through the top haha.

adrs2k 09-08-2010 01:33 PM
Hopefully you get pictures soon. I think by doing the math, if I were to screw the shift knob on all the way, I would be about 1-1.5 inches higher than were I am at know, which is about where I wanted to be.

This might just work!

What kind of finishes are going to be available? I am looking for it to be black, so it blends in with the OEM shifter and boot. I am afraid the SS look will make it stick out too much.

Moddiction 09-08-2010 01:34 PM
Will have pictures by next week. Yeah I think that is about how it should sit!

TurboTanger 09-09-2010 11:12 PM
Originally Posted by adrs2k,Sep 8 2010, 01:33 PM
What kind of finishes are going to be available? I am looking for it to be black, so it blends in with the OEM shifter and boot. I am afraid the SS look will make it stick out too much.
:iagree: :iagree: :iagree:

Moddiction 09-10-2010 02:50 PM
I will see about that. It is probably going to be a stainless steel but I will see about possibly blackening it and see how it comes out.

TurboTanger 09-14-2010 08:59 PM
Any updates?

Moddiction 09-14-2010 09:06 PM
Hoping to have them by end of the week or early next week. Samples have been made so just waiting for the first batch to arrive.

Moddiction 09-15-2010 03:10 PM
Got some pictures of the shifter extender. I will have them in stock by the weekend it is looking like.

https://cimg6.ibsrv.net/gimg/www.s2k...f43fceb553.jpg https://cimg7.ibsrv.net/gimg/www.s2k...83785b98ff.jpg https://cimg8.ibsrv.net/gimg/www.s2k...a709911807.jpg https://cimg9.ibsrv.net/gimg/www.s2k...1df665d9d7.jpg https://cimg0.ibsrv.net/gimg/www.s2k...d679a3aa59.jpg


All times are GMT -8. The time now is 10:47 PM.
Page 1 of 15
1
2
3
11
Last »
Show 75 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands