T1R 70R-EM 70MM Sport Exhaust
#1
Former Sponsor
Thread Starter
T1R 70R-EM 70MM Sport Exhaust
For all the folks that want Ti/Burn tips on our EM Exhaust. This is the new Version of our EM exhaust with a burnt tip. The tip is not TI, it is just burnt. Price for this exhaust is not $1295 shipped. There will be no more old style SS exhaust.
Dyno up!
gains throughout the whole powerband, we can honestly say this is the most power we've seen out of a dual exhaust system!!
------------------------------------------------------------------------------
UPDATE!! DUAL Sparrow R-EM has just landed, will be shipping ASAP!!
UPDATE 5/28/08 STAINLESS 70R-EM is finally here !!! get yours today before we sell out again!
---------------------------------
This is what everyone has been waiting for, the Evasive T1R 70R-EM 70mm exhaust. Price, pictures and sound clips are down below. If you want to order these you can either give me a call or send the funds to sales@evasivemotorsports.com via paypal . When using paypal please put #1 T1R EM Exhaust #2 S2ki Member #3 Telephone Number.
In car video! Click Here!
Dyno/driving video!! Click Here!
Quick sound clip: Click Here!
The exhaust will be a cat-back 70mm with resonator (Test Pipe Optional). It will be available in both stainless steel and titanium. Muffler is oval with slant down tip. Total weight of the stainless exhaust is 24lbs, and the titanium version will be 14bs. The exhaust offers a good balance between performance and streetability.
DYNO Graph
Blue/Red Run = T1R 70R-EM Limited / Comptech Intake / T1R Header / T1R 70mm TP
Green Run = J's 60RS / Comptech Intake / T1R Header
Overall increase in HP mid-high end HP and torque. Compare to the J's 60RS this exhaust beats it in every range of the powerband.
NEW NEW NEW
Ti version here now!!
NEW!!!! R-EM 70mm SPARROWs have landed! Place your order today!
New pics on our AP2
Click here for video
it is by far the quietest dual 70mm available for the s2000.
we should have vid clips coming soon also
Weight of this exhaust is : 40LBS
for video sound clip click here:
Click Here for more info and sound clip
Dyno up!
gains throughout the whole powerband, we can honestly say this is the most power we've seen out of a dual exhaust system!!
Pricing on the exhaust:
Special introductory S2Ki price: (SPECIAL PRICING RIGHT NOW!!!)
T1R 70R-EM (Stainless) - $999 shipped to lower 48 states
T1R 70R-EM (Full Ti) - $2069 shipped to lower 48 states
T1R 70R-EM DUAL - $1250 shipped to lower 48 states
If you want to order through
Call or PM for more info or to place order.
Dennis or Mike
626-336-3400
Dyno up!
gains throughout the whole powerband, we can honestly say this is the most power we've seen out of a dual exhaust system!!
------------------------------------------------------------------------------
UPDATE!! DUAL Sparrow R-EM has just landed, will be shipping ASAP!!
UPDATE 5/28/08 STAINLESS 70R-EM is finally here !!! get yours today before we sell out again!
---------------------------------
This is what everyone has been waiting for, the Evasive T1R 70R-EM 70mm exhaust. Price, pictures and sound clips are down below. If you want to order these you can either give me a call or send the funds to sales@evasivemotorsports.com via paypal . When using paypal please put #1 T1R EM Exhaust #2 S2ki Member #3 Telephone Number.
In car video! Click Here!
Dyno/driving video!! Click Here!
Quick sound clip: Click Here!
The exhaust will be a cat-back 70mm with resonator (Test Pipe Optional). It will be available in both stainless steel and titanium. Muffler is oval with slant down tip. Total weight of the stainless exhaust is 24lbs, and the titanium version will be 14bs. The exhaust offers a good balance between performance and streetability.
DYNO Graph
Blue/Red Run = T1R 70R-EM Limited / Comptech Intake / T1R Header / T1R 70mm TP
Green Run = J's 60RS / Comptech Intake / T1R Header
Overall increase in HP mid-high end HP and torque. Compare to the J's 60RS this exhaust beats it in every range of the powerband.
NEW NEW NEW
Ti version here now!!
NEW!!!! R-EM 70mm SPARROWs have landed! Place your order today!
New pics on our AP2
Click here for video
it is by far the quietest dual 70mm available for the s2000.
we should have vid clips coming soon also
Weight of this exhaust is : 40LBS
for video sound clip click here:
Click Here for more info and sound clip
Dyno up!
gains throughout the whole powerband, we can honestly say this is the most power we've seen out of a dual exhaust system!!
Pricing on the exhaust:
Special introductory S2Ki price: (SPECIAL PRICING RIGHT NOW!!!)
T1R 70R-EM (Stainless) - $999 shipped to lower 48 states
T1R 70R-EM (Full Ti) - $2069 shipped to lower 48 states
T1R 70R-EM DUAL - $1250 shipped to lower 48 states
If you want to order through
Call or PM for more info or to place order.
Dennis or Mike
626-336-3400
#7
Registered User
Join Date: Mar 2001
Location: Annapolis
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
First, thanks for putting this together. I am considering this exhaust, but have a few questions.
1) I noticed the mount near the rear diff looks unfinished. Do you know what the finished mount will look like? I have this hitch, http://www.chaserace.com/s2k.php which uses the same bolts to mount to and want to figure out it they will work together.
2) Do you know the weight of the stainless steel model?
3) Where all of the tests run with a test pipe? I am required to run the stock cat, and want to know if there will be drone with that installed.
Thanks!
1) I noticed the mount near the rear diff looks unfinished. Do you know what the finished mount will look like? I have this hitch, http://www.chaserace.com/s2k.php which uses the same bolts to mount to and want to figure out it they will work together.
2) Do you know the weight of the stainless steel model?
3) Where all of the tests run with a test pipe? I am required to run the stock cat, and want to know if there will be drone with that installed.
Thanks!
Trending Topics
#8
Former Sponsor
Thread Starter
1) That is the finished rear diff mount, it seems like the mount could fit underneath your hitch since its only a thin piece of bracket.
2) The stainless one weighs 25 lbs on our shipping scale.
3) all the test runs are with test pipe, I have ran the exhaust with a cat before and it does not drone what so ever.
Mike
2) The stainless one weighs 25 lbs on our shipping scale.
3) all the test runs are with test pipe, I have ran the exhaust with a cat before and it does not drone what so ever.
Mike
#9
Registered User
Join Date: Mar 2001
Location: Annapolis
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EvasiveMotorsports,Oct 25 2007, 12:22 PM
1) That is the finished rear diff mount, it seems like the mount could fit underneath your hitch since its only a thin piece of bracket.
2) The stainless one weighs 29 lbs on our shipping scale.
3) all the test runs are with test pipe, I have ran the exhaust with a cat before and it does not drone what so ever.
Mike
2) The stainless one weighs 29 lbs on our shipping scale.
3) all the test runs are with test pipe, I have ran the exhaust with a cat before and it does not drone what so ever.
Mike