S2KI Honda S2000 Forums - Downforce, APR, Chargespeed

Downforce Carbon Fiber Products from Go Tuning Unlimited

PRICE MATCH GUARANTEE on all Downforce products

Downforce Carbon Fiber Front Splitter Lip
The Downforce Front Splitter Lip was designed to complement the popular Downforce Side Diffusers with an aerodynamic advantage. This lip acts as a front spoiler to increase front end stability and downforce. Designed specifically for the AP2 front bumper the lip bolts up directly using factory mounting holes. As with all Downforce products, Made in USA.

MSRP: $425
Our Price: $285

For AP2 Bumper with OEM AP2 Lip
http://www.gotuning.com/images/produ...8.thumb_medium http://www.gotuning.com/images/produ...1.thumb_medium

For AP2 Bumper
http://www.gotuning.com/images/produ...8.thumb_medium http://www.gotuning.com/images/produ...3.thumb_medium

Downforce Rear Diffuser
The Downforce AP2 Rear Diffusers are finally available for sale! Here are some details about the final production kit. It was designed to complement the popular Downforce Side Diffusers and also be aerodynamically functional. The rear center section reaches all the way in front of the diff and attaches to the rear lower tie bar.
8-piece Carbon diffuser kit includes COMPLETE hardware set necessary for install.
Made in USA.

Complete Carbon Version
MSRP is $1,550

Center Only FRP Version
MSRP is $900

Features:
- Extended length for greater aerodynamic efficiency
- Removable fins for easy damage repair
- Optional center end cap (included)
- Anodized aluminum edge reinforcement to increase rigidity for added stability
- Molded side diffusers for flush fitment to AP2 rear bumper
- Anodized aluminum rear lower tie bar and rear bumper brackets
- Stainless steel bolts, nylon washers, and rubber nuts with brass fittings for rust resistance

http://www.gotuning.com/images/produ...4.thumb_medium http://www.gotuning.com/images/produ...6.thumb_medium

http://www.gotuning.com/images/produ...3.thumb_medium http://www.gotuning.com/images/produ...8.thumb_medium

Center only FRP version
http://www.gotuning.com/images/produ...4.thumb_medium

Downforce Wide Front Fenders
Downforce Wide Front Fenders are 30mm wider and standard OEM fenders. Fits all front bumpers. The body line that runs next to the edge of the hood as been sharpened for a slightly more aggressive look. Features carbon fiber reinforced mounting points for added durability and resistance to cracking.
- Fits all S2000 model years. FRP construction.
- Carbon reinforcements.
- Made in USA

MSPR $850 + shipping
Our Price: $795 + shipping

http://www.gotuning.com/images/produ...5.thumb_medium http://www.gotuning.com/images/produ...1.thumb_medium

http://www.gotuning.com/images/produ...3.thumb_medium http://www.gotuning.com/images/produ...2.thumb_medium

http://www.gotuning.com/images/produ...8.thumb_medium http://www.gotuning.com/images/produ...0.thumb_medium

Downforce Carbon Fiber Side Diffusers
- Completely original design built from scratch (using a clay mold) exclusively for the S2000
- Mounts directly onto the body using self-tapping screws (included) that are pre-marked
- High polish clearcoat finish
- Full Carbon Fiber construction
- Weighs less than 1 lb per side! Under 2 lbs total for both sides!
- Available in 1x1 and 2x2 Weave Carbon Fiber

MSPR $450 + shipping
Our Price: $427.50 + shipping

http://www.gotuning.com/images/produ...1.thumb_medium http://www.gotuning.com/images/produ...2.thumb_medium

http://www.gotuning.com/images/produ...2.thumb_medium http://www.gotuning.com/images/produ...d.thumb_medium

Downforce Sport Lip
Made with ultra high quality fiberglass. This is not the typical Chinese Vflex / Duraflex / or cheap gimmick. Consist of lightweight performance composites with high modulus makes it ideal for automotive aerodynamic parts. Grade A surface (no waves, no pits, no blocking!). High temperature rating can withstand over twice the amount of heat of any other companies resin. No shrinkage so these parts will fit like factory parts.

Price for FRP is $474 + shipping
Price for CFRP is $599 + shipping

http://www.gotuning.com/images/produ...1.thumb_medium http://www.gotuning.com/images/produ...d.thumb_medium

Downforce Carbon Fiber Header Heat Shield
- Available in 1x1 or 2x2 Weave
- Modeled after the original OEM heat shield
- Replaces OEM heatshield and bolts on directly
- Full Carbon Fiber construction for strength and durability
- Polished clearcoat on both sides with an embossed "DF" logo
- Weighs only .75 lbs!

MSPR $250 + shipping
Our Price: $237.50 + shipping

http://www.gotuning.com/images/produ...1.thumb_medium http://www.gotuning.com/images/produ...2.thumb_medium

http://www.gotuning.com/images/produ...1.thumb_medium http://www.gotuning.com/images/produ...2.thumb_medium

================================================== =====

Shipping/Insurance Info:
- Shipping cost will be determined by location.
- Insurance will be included on all orders.
- Shipping to Canada, Hawaii, Alaska, or international. Please PM me for shipping quote.
- For local pick up please PM me. We are located in Orange County, CA.
- The product(s) will be very well packaged.

Payment Info:
- You can order by phone, email, PM, or through our website at gotuning.com
- We accept Visa, Mastercard, Discover, Paypal, Cash, Bank Cashier's Check.
- All order MUST be shipped to billing address or confirmed address for paypal.
- Paypal payments can be sent to paypal@gotuning.com.
- 8.75% Sales Tax sales tax is required for all sales within California.