|
EVS Tuning Double Lock Seat Rails
Hey S2ki,
Just wanted to introduce our new seat rail. Made in Japan. EVS Tuning Low Position seat rail is the perfect choice for the enthusiast This will fit most standard sized racing bucket seats such as Recaro SPG / SPG3, Sparco, Bride seats, etc. Each seat bracket is made and certified to Recaro specifications and requirements. Vibrations and slight movements of the seat while using this rail is normal, and will not detract from the rail's ability to properly hold the seat. https://www.evasivemotorsports.com/m...00_900x589.jpg MSRP $265 -------------------------------------------------------------------------------------------------------------------------------------------------- https://www.evasivemotorsports.com/M...3/cc_types.gif Payment Information Paypal Paypal Address – Sales@Evasivemotorsports.com Memo - #1 What you want to order #2 S2ki Member #3 Telephone number We will only take confirmed paypal accounts with verified shipping addresses Credit Card Please give me a call at the office (626.336.3400) for any credit card transaction. The billing and shipping address has to be the same unless your shipping address is an alternative address filed with your credit card company International If you are an international customers we only take wire transfer as a form of payment. Please PM me for wire transfer information 9.0% California tax applies if you are in California. Contact Information Evasive Motorsports - 626.336.3400 - joshua@Evasivemotorsports.com Evasive Motorsports Website Evasive Motorsports Blog |
Nice. I dont need one but can imagine lots of people will be thankful another rail is available. Good work.
|
Will this work with a Recaro SPG-N?
|
Will it work with Recaro spg-s and on 07+ passenger side?
|
What about fitment for bottom mount recaros like the SR4s? Will they bolt right up?
How low do they sit relative to the nagisa rails (bucket), and bride RO rails (bottom mount)? |
Nice touch with the extra bend in the locking lever.
|
Originally Posted by Crease
(Post 24102465)
Will this work with a Recaro SPG-N?
|
Originally Posted by TW00Si
(Post 24103268)
Will it work with Recaro spg-s and on 07+ passenger side?
|
Originally Posted by wingz
(Post 24103560)
What about fitment for bottom mount recaros like the SR4s? Will they bolt right up?
How low do they sit relative to the nagisa rails (bucket), and bride RO rails (bottom mount)? |
I'm guessing a no-go for Recaro Pole Position? Especially the even wider ABE?
|
Originally Posted by TsukubaCody
(Post 24104374)
I'm guessing a no-go for Recaro Pole Position? Especially the even wider ABE?
|
in stock ready to ship!
|
Will this fit the recaro tsg? How much shipped to 19382?
|
Originally Posted by drj5011
(Post 24112975)
Will this fit the recaro tsg? How much shipped to 19382?
|
Originally Posted by EvasiveMotorsports
(Post 24104350)
sorry for passenger side it's only 00-05
|
Will it fit spg3?
|
Originally Posted by proracer07
(Post 24114405)
Will it fit spg3?
|
In stock ready to ship! PM For Best Price!
|
In stock ready to ship! PM For Best Price!
|
Will this fit recaro spg racer?
|
Originally Posted by proracer07
(Post 24126144)
Will this fit recaro spg racer?
|
Is this the same as Nagisa rail?
|
Originally Posted by DennisRen
(Post 24126807)
Is this the same as Nagisa rail?
|
Originally Posted by jst2878
(Post 24127244)
if it aint, then im a sons a beetch
|
Know if they'll fit Sparco Rev? Thanks.
|
Originally Posted by ISADE
(Post 24137957)
Know if they'll fit Sparco Rev? Thanks.
|
Originally Posted by EvasiveMotorsports
(Post 24137992)
nope dont think so. that seat is too wide
|
Originally Posted by ISADE
(Post 24138489)
The seat or the rail is too wide? Mounting points on the Rev are 380 mm whereas on a Sparvo Evo, 400mm, Recaro SPG is 402mm. Just don't want you to miss out on sales because I have a Rev sitting in my garage! Thanks.
spg 395mm Sparco USA sparco rev. 470mm in the front. thats where the issue will be. |
In stock Ready to ship! PM for best price!
|
Would it work for AP1 driver for Recaro Pole Position Jersey Red Suede Red Silver Logo?
PM me for out the door pricing shipped to 95054. |
Originally Posted by REV HRD
(Post 24176164)
Would it work for AP1 driver for Recaro Pole Position Jersey Red Suede Red Silver Logo?
PM me for out the door pricing shipped to 95054. |
Back in stock ready to ship!
|
In Stock Ready to Ship!
|
Will this fit sparco circuit II LF?
|
Originally Posted by eight
(Post 24222910)
Will this fit sparco circuit II LF?
|
Anything you guys would recommend for rails that are as low as humanly possible that will fit a seat of that size?
|
Originally Posted by eight
(Post 24223413)
Anything you guys would recommend for rails that are as low as humanly possible that will fit a seat of that size?
|
In stock Ready to ship!
|
In Stock Ready to Ship! PM for Best Pricing!
|
Bump! In Stock Ready to Ship! PM for Best Pricing!
|
Is there a seat belt attachment? Will they fit Mugen MS-R?
|
Originally Posted by mkluge84
(Post 24505964)
Is there a seat belt attachment? Will they fit Mugen MS-R?
|
Will this fit a recaro sr4?
|
Originally Posted by pcasupreme
(Post 24510009)
Will this fit a recaro sr4?
|
Bump! In Stock Ready to Ship! Pm for Best Pricing!
|
Just wanted to give some props on these rails. I just installed my bride Vios 3 into my 08 Ap2 and these rails are top notch! The slider handles are easily accessible, the hardware and quality is fantastic. The rails dropped right in with zero issues. A+ to evasive!! |
In Stock Ready to Ship! PM for S2ki Pricing!
|
Bump! In stock ready to ship!
|
Bump!
|
| All times are GMT -8. The time now is 11:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands