Polyurethane One-Piece CR AP2 Bumper with Brake Ducts
#1
Former Sponsor
Thread Starter
Polyurethane One-Piece CR AP2 Bumper with Brake Ducts
So for those who don't know, we have been cooking up a front bumper for our S2000 to make life simpler for a splitter, brake ducts and no broken grill problems that OEM has. Bumper is made out of high quality polyurethane for flexibility and durability.
-Polyurethane
-Screw in brake ducts
-Molded CR lip with flat bottom
-Integrated grille (no more grilles falling out on track)
Price: $699.99
Shipping available at $214.99 to the lower 48.
The painted yellow bumper is an original OEM CR Lip and Ap2 Bumper
OEM
Ballade
Notice how we added more material in the center to make the lip flat on the bottom.
Note: OEM front grills are not part of the bumper, they are a separate grill you have to mount in and the tabs always break leaving it flapping around. Our grill is a little thicker but molded as part of the bumper. This was extremely hard for our manufacturer to do this, but we got it looking pretty good. Even left a spot for the front plate bracket.
OEM bumper bracket retained.
Brake Ducts
Removable duct if you don't want to use them.
OEM weight if anyone cares to know.
Our bumper came in a few ounces lighter
Bottom of our bumper versus stock
-Polyurethane
-Screw in brake ducts
-Molded CR lip with flat bottom
-Integrated grille (no more grilles falling out on track)
Price: $699.99
Shipping available at $214.99 to the lower 48.
The painted yellow bumper is an original OEM CR Lip and Ap2 Bumper
OEM
Ballade
Notice how we added more material in the center to make the lip flat on the bottom.
Note: OEM front grills are not part of the bumper, they are a separate grill you have to mount in and the tabs always break leaving it flapping around. Our grill is a little thicker but molded as part of the bumper. This was extremely hard for our manufacturer to do this, but we got it looking pretty good. Even left a spot for the front plate bracket.
OEM bumper bracket retained.
Brake Ducts
Removable duct if you don't want to use them.
OEM weight if anyone cares to know.
Our bumper came in a few ounces lighter
Bottom of our bumper versus stock
Last edited by BalladeSports; 05-08-2017 at 01:17 PM.
The following users liked this post:
BroxS2K (08-01-2017)
#4
This is a rock solid price, really interested.
As stated in your original thread about this, thank you guys for producing this.
Do we inquire about ordering via PM to you here, or is it also available online on your website?
As stated in your original thread about this, thank you guys for producing this.
Do we inquire about ordering via PM to you here, or is it also available online on your website?
#5
Former Sponsor
Thread Starter
^Still being added to the website at the moment. Pm response is fine or email info@balladesports.com
#7
Former Sponsor
Thread Starter