Evasive Exclusive WiseFab Grip Kit
11-17-2016, 02:30 PM
#1
Former Sponsor
Thread Starter
Evasive Exclusive WiseFab Grip Kit
Hey S2ki,
Just wanted to share with you guys the new Wisefab Grip Kit. We've tested the kit with Wisefab Engineers and have nothing but good things to say. Just when we thought the original double wishbone suspension could not be further improved, we were wrong! It completely changed the feel and dynamics of the car and we are stoked to help bring this product to the market soon.
Better kinematics for lowered car
- Honda S2000 is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldnÂ’t work as it supposed to. The Wisefab kit would bring the RC, bump steer and camber gain back to normal range on lowered car, providing better roll stiffness, better handling and grip. It has over 40mm lower A-arm joint drop compare to original knuckle.
- Weight reduction over original components and still maintaining required strength and stiffness
7075-T6 aluminium billet CNC knuckles and CrMo arms with optimized design and all double shear connections provide low weight and high strenght. CrMo rod ends and sphericals used instead of rubber bushings
- Easy camber adjustment on knuckle
Camber can be adjusted easily on trackside in a few minutes
- Bump steer adjustment
Bumpsteer is adjustable by tie rod height on knuckle
- Quicker steering ratio.
Steering ratio is slightly quicker compare to original
- Other components, packaging and clearance.
- This kit assumes coilovers
- Minimum rim size is 17“
- Track width is close to original, So similar size and offset rims can be used as with original suspension. We have tested 18x10 ET35, 275/35 R18 with wider fender flares
- Original wheel speed sensor can be used
Taking Deposits now.
Will take detailed pictures when the kits arrive!
[media]http://www.youtube.com/watch?v=ZH746NuuiqU[/media]
Honda Parts Needed for install
44300-S84-A02 x4 Wheel Bearing
90681-SG0-000 x4 Circlip (inner) 84mm
Front:
44600-S2A-000 x2 Front Hub Assembly
44350-S2A-000 x2 Front Pulser Assembly
90305-S2A-003 x2 Spindle Nut
Rear
42210-S2A-000 x2 Rear Hub
MSRP $5900
--------------------------------------------------------------------------------------------------
Payment Information
Paypal
Paypal Address – Sales@Evasivemotorsports.com
Memo - #1 What you want to order #2 S2ki Member #3 Telephone number
We will only take confirmed paypal accounts with verified shipping addresses
Credit Card
Please give me a call at the office (626.336.3400) for any credit card transaction. The billing and shipping address has to be the same unless your shipping address is an alternative address filed with your credit card company
International
If you are an international customers we only take wire transfer as a form of payment. Please PM me for wire transfer information
9.0% California tax applies if you are in California.
Contact Information
Evasive Motorsports
- 626.336.3400
- Joshua@Evasivemotorsports.com
Evasive Motorsports Website
Evasive Motorsports Blog
Just wanted to share with you guys the new Wisefab Grip Kit. We've tested the kit with Wisefab Engineers and have nothing but good things to say. Just when we thought the original double wishbone suspension could not be further improved, we were wrong! It completely changed the feel and dynamics of the car and we are stoked to help bring this product to the market soon.
Better kinematics for lowered car
- Honda S2000 is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldnÂ’t work as it supposed to. The Wisefab kit would bring the RC, bump steer and camber gain back to normal range on lowered car, providing better roll stiffness, better handling and grip. It has over 40mm lower A-arm joint drop compare to original knuckle.
- Weight reduction over original components and still maintaining required strength and stiffness
7075-T6 aluminium billet CNC knuckles and CrMo arms with optimized design and all double shear connections provide low weight and high strenght. CrMo rod ends and sphericals used instead of rubber bushings
- Easy camber adjustment on knuckle
Camber can be adjusted easily on trackside in a few minutes
- Bump steer adjustment
Bumpsteer is adjustable by tie rod height on knuckle
- Quicker steering ratio.
Steering ratio is slightly quicker compare to original
- Other components, packaging and clearance.
- This kit assumes coilovers
- Minimum rim size is 17“
- Track width is close to original, So similar size and offset rims can be used as with original suspension. We have tested 18x10 ET35, 275/35 R18 with wider fender flares
- Original wheel speed sensor can be used
Taking Deposits now.
Will take detailed pictures when the kits arrive!
[media]http://www.youtube.com/watch?v=ZH746NuuiqU[/media]
Honda Parts Needed for install
44300-S84-A02 x4 Wheel Bearing
90681-SG0-000 x4 Circlip (inner) 84mm
Front:
44600-S2A-000 x2 Front Hub Assembly
44350-S2A-000 x2 Front Pulser Assembly
90305-S2A-003 x2 Spindle Nut
Rear
42210-S2A-000 x2 Rear Hub
MSRP $5900
--------------------------------------------------------------------------------------------------
Payment Information
Paypal
Paypal Address – Sales@Evasivemotorsports.com
Memo - #1 What you want to order #2 S2ki Member #3 Telephone number
We will only take confirmed paypal accounts with verified shipping addresses
Credit Card
Please give me a call at the office (626.336.3400) for any credit card transaction. The billing and shipping address has to be the same unless your shipping address is an alternative address filed with your credit card company
International
If you are an international customers we only take wire transfer as a form of payment. Please PM me for wire transfer information
9.0% California tax applies if you are in California.
Contact Information
Evasive Motorsports
- 626.336.3400
- Joshua@Evasivemotorsports.com
Evasive Motorsports Website
Evasive Motorsports Blog
Last edited by EvasiveMotorsports; 11-21-2016 at 02:36 PM.
12-05-2016, 08:51 AM
#6
Former Sponsor
Thread Starter
