Looks very good and effective,will look good in Silverstone :tipwink:

I would try and get the splitter to continue under the car as far as possible so it will do something too.

I had an APR splitter under mine and at speed you could feel it's there

yea i might just try the gloss black what i normally use in the resin when manufacturing. and get them out the mould in high gloss finish.

really good point know we thinking the same.

That's the reason i gave the lip a drop in the centre so at high speed the air can vent through all so if you notice the 4 fixing points in the centre the middle 2 are more back towards the engine then the ones besides them to hold the lip better and where the angles are in the corners its more sharpe and more of an aerodynamic shape for the are to cut through.

The lip ends more where the bumper finishes under the car after the bumper its mostly just the dust shield there not really any secure points that's why i just left it in level with the bumper underneath. It goes on pretty solid.

hay fellas update on the lip.

.moulded the lip of today baked it trimmed it and popped out nicely after it was cured.

[attachment=86989:image1.PNG]


hope fully will make a fresh one on Monday. and see how it looks. https://www.s2ki.com/s2000/public/st...ault/smile.gif

more update on the lip and started the side skirts these were pretty long I cut them short and attached the end back on will put some more pics later today of the side skirt extensions.

[attachment=87191:image5.PNG] [attachment=87192:image4.PNG] [attachment=87193:s2000 (2).PNG]


[attachment=87194:s2000.PNG] [attachment=87195:s2000 (3).JPG] [attachment=87196:s2000 (4).JPG]

http://i1199.photobucket.com/albums/...psfshonfim.jpg

Him related to you must be.

here is more on the side extensions and started the back spats. https://www.s2ki.com/s2000/public/st...t/rolleyes.gif

[attachment=87241:picss (3).JPG] [attachment=87242:picss.JPG] [attachment=87243:picss (2).JPG]


[attachment=87244:picss (1).JPG]

Hi guys more update all most there painted the side skirts and the spats all so painted the silver Honda wheel caps waiting on red Honda decals to put on the wheel caps fitted the side extensions, spats, callipers wheels, half way don with the rear spoiler to go with the rear quarter lines and smiler shape to the kit. will update when the rear spoiler is don.

[attachment=87307:skirts.JPG] [attachment=87308:2000.s (3).JPG] [attachment=87309:pics. (1).JPG]


[attachment=87310:pics. (4).JPG] [attachment=87311:pics..JPG] [attachment=87313:pics. (2).JPG]


[attachment=87314:2000.s (7).PNG] [attachment=87315:wheels.PNG]

Do a diffuser for the rear bumper that comes up & covers the black section where the fog light is.