Fast Road Set Up
#21
UK Moderator
Originally Posted by markforrester99' timestamp='1397729890' post='23116902
Dont worry too much about tyre wear.
Aslong as they dont go mad with the rear toe then you can get good tyre wear. I run -1.3 camber at the front and about -2 at the the rear. I have total toe in of 0.15 on the rear and the car is stable and isnt eating the tyres.
Aslong as they dont go mad with the rear toe then you can get good tyre wear. I run -1.3 camber at the front and about -2 at the the rear. I have total toe in of 0.15 on the rear and the car is stable and isnt eating the tyres.
Front camber 1[sup]0[/sup]
Front Toe 0[sup]0[/sup]
Caster 6[sup]0[/sup]
Rear camber 1.5[sup]0[/sup]
Rear toe 0.5[sup]0[/sup]
However I am open to suggestions
#22
Registered User
Thread Starter
Join Date: Aug 2013
Location: Newcastle Upon Tyne, UK
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bruceski' timestamp='1397737089' post='23117003
[quote name='markforrester99' timestamp='1397729890' post='23116902']
Dont worry too much about tyre wear.
Aslong as they dont go mad with the rear toe then you can get good tyre wear. I run -1.3 camber at the front and about -2 at the the rear. I have total toe in of 0.15 on the rear and the car is stable and isnt eating the tyres.
Dont worry too much about tyre wear.
Aslong as they dont go mad with the rear toe then you can get good tyre wear. I run -1.3 camber at the front and about -2 at the the rear. I have total toe in of 0.15 on the rear and the car is stable and isnt eating the tyres.
Front camber 1[sup]0[/sup]
Front Toe 0[sup]0[/sup]
Caster 6[sup]0[/sup]
Rear camber 1.5[sup]0[/sup]
Rear toe 0.5[sup]0[/sup]
However I am open to suggestions
[/quote]
MY06. This is just what I have briefly read I would have said that this was the total.
#23
Registered User
Thread Starter
Join Date: Aug 2013
Location: Newcastle Upon Tyne, UK
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bruceski' timestamp='1397737089' post='23117003
[quote name='markforrester99' timestamp='1397729890' post='23116902']
Dont worry too much about tyre wear.
Aslong as they dont go mad with the rear toe then you can get good tyre wear. I run -1.3 camber at the front and about -2 at the the rear. I have total toe in of 0.15 on the rear and the car is stable and isnt eating the tyres.
Dont worry too much about tyre wear.
Aslong as they dont go mad with the rear toe then you can get good tyre wear. I run -1.3 camber at the front and about -2 at the the rear. I have total toe in of 0.15 on the rear and the car is stable and isnt eating the tyres.
Front camber 1[sup]0[/sup]
Front Toe 0[sup]0[/sup]
Caster 6[sup]0[/sup]
Rear camber 1.5[sup]0[/sup]
Rear toe 0.5[sup]0[/sup]
However I am open to suggestions
[/quote]
That is a total figure and would be toe in. Unless people can recommend better from previous experience.
#24
UK Moderator
Looks about right in that case, you could got to 2[sup]o[/sup] rear camber if you like but it's all largely subjective anyway. Symmetry is the most important thing.
#25
Registered User
Thread Starter
Join Date: Aug 2013
Location: Newcastle Upon Tyne, UK
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
#26
Thread
Thread Starter
Forum
Replies
Last Post
Destiny2002
Delaware Valley S2000 Members
6
07-21-2002 12:42 PM