NineBolts

Not really a mod but nobody has mentioned greasing bushes etc

mikey k

My list of "low cost" mods:
roof on move
LED side & interior lights
100W main beam
Debadged outside
Lower brake brace
Seat belt pad on seat to stop is squeaking
Shopmans roof protection sleeve
Colour coded key hole plugs
Magnetics drain plugs
Seat belt & key debuzz
Spare & tool kit removal
Storage net in boot
Honda map pocket on hooks behind drivers seat
Grease all alignment bolts
Paint brake calipers to stop corrosion
Stubby aerial
Countersunk knob with gaiter retainer
"Aero" wipers
Throttle cable adjustment
Pull fuse for HID washers
Grease roof mechanism & seals
Seal up rear number plate to prevent gravel collection
Front number plate holder removal
Hammerite rad mounts, battery strap & front bumper stiffner
303 the roof twice a year
Tom Tom and radar detector power & cable to left of rear view mirror
1/2 of drivers footwell air vents taped off

That's all I can remember for now!

Ultra_Nexus

Greased bushes:





Repaired engine mount:


Clutch slave cylinder de-burr and grease.

Megan Toe Arms protection:


Exhaust grounding issue:


HID light Main Beams install:



Baked my brakes:


Shopman though

GrittyShaker

Not really a mod, but I'm going to add it anyway.

Cheapy cheap paintwork damage repair. Quite pleased since it was my first attempt.

Dan Hale

Nobody has mention one of the most common "free" mods - airbox lid removal.

Bramblecat

Cheap mods - LED's for interior lighting and side lights

Free mod - Removed headlamp washer fuse

Free mod to be done - Stopping the damn key in the ignition alarm!

Quite fancy the Shopman sound proofing but that means spanners and taking things out, so it will probably not get done as I'm a numpty when it comes to tools.

j8mie

Got any more photos of this? Might do something similar with mine as I don't really want it out on show on top of the dash in case some tw@t tries to help themselves to it.

Shopman

If you flip in the two catches shown and then fix the lid on again with the remaining catches some of the noise can escape without the heat ingestion problems you get with the lid removed

martin j

I posted regarding this recently asking if it was possible, didn't get a reply, so, how to do it please. It made a difference on my civics.

Shopman

Replace the mild steel the bolts holding on the exhaust tips with stainless before they are 'welded' in place, or at least take them out and copper grease them while you can