razzele

Are you going to charge £50 to post that tiny parcel too ?

TTS-Performance

Razzele, I have amended your shipping cost to £33.33 as you only require a bracket set and pulleys without the head unit. If customers order a V2 EMS from us at the time they order their kit, this will be included in their shipping costs.
Sorry I can't make you happy with delivery, however I pay for weight classifications to set brackets, and this will fall into it.

Please could you let me know if you still want to go ahead with your purchase.
Thanks,
TTS

dazza1990

Would a 4 BAR MAP sensor be required with this kit?

https://www.hondata.com/4bar-map-s2000

I'll be mapping with the flashpro.

rnibleck

Sent an e-mail regarding the price you sent me through and the invoice address for the deposit

ta

Tom

woollie

I am in Hertfordshire. Where is the best place in the southeast to get the Supersport kit fitted. Looking for installation, set-up and anything else that is needed to help it run reliably.

Thanks.

TTS-Performance

HI Woollie,
We are only an hour or so from Hertfordshire, and we have a full workshop and dyno to carry out the fitting and mapping of the s2000. Installation on the Supersport Kit is £700 + VAT, mapping will be £300 + VAT. You will need either a flashpro or AEM V2 EMS - we can supply, please call for details.
If you would like to go ahead with this, please email Berrya@tts-performance.co.uk
Thanks

TTS-Performance

Hi Guys, we have just 3 days until this offer closes, we have hit the required number of users to grab the 25% discount, so jump on board and order those kits. Don't be a turbo guy and lag behind, supercharge yourself to order your kit today..
Thanks,
TTS

bgh187

Received my Kit yesterday, Thanks TTS for the great deal and easy transaction

bgh187

I had my car on the dyno yesterday to be mapped.
Firstly they performed a smoke test to check for leaks and found the the join between the gearbox and compressor housing was leaking. Has anyone else noticed any leaking from this area around the housing?
Final numbers for the car were 392 crank hp and 245ft/lb @ 11.5psi with a 9100rpm limiter.
I'm happy with the way the car has turned out but i am wondering how much boost i could be losing through the leak.

Nottm_S2

on the charger itself?

you are making broadky the right boost i think, a little down maybe.. i get 12.25psi engine load at redline? dyno figures are massively variable