Just moved (back) to the Chicagoland area
#1
Registered User
Thread Starter
Just moved (back) to the Chicagoland area
Hey guys,
EDITED: 12/14/18 with updates
Not a new member here but I just picked up a job at NAVISTAR in Lisle, IL. I was born up here and have lots of family up here so I'm not TOTALLY new to the area... but the car is new to the area. :P
About the car:
2000 AP1
214k miles (and counting)
Comptech N1200 kit- aftercooled, Comptech airbox, 3.6" pulley (Might be 3.4... I forget...), 17.8 psi, upgraded heat exchanger, Cobra pump.
Walbro 255
ID1000s
AEM EMS V2
AP2 retainers and oil jets
ACT pressure plate, stock clutch/Flywheel
Test pipe
Tanabe Medallion Concept G exhaust
blah blah blah...
My build thread is severely out of date but you're welcome to browse through some of the finer details.
I'm in the Lombard area if anyone needs a hand or to just grab some food.
Winter plans:
SOS throttle body.
Clean up the ports on a spare intake manifold and powdercoat it.
PLM header Coated with Swain-Tech's White Lightning coating.
Radium Engineering fuel rail and everything to hook it up.
Work on lowering IATS and heat soak (Just cut hood vents into a spare hood as a start).
ABS/ driver's side wire harness relocation.
Have Josh (AP1Chief) keep tweaking my tune.
Cleanup wiring and anything else I can think of while I'm not driving it.
Powdercoat the aftercooler/intake/some brackets
Get some more fresh air to the air filter.
Thanks!
EDITED: 12/14/18 with updates
Not a new member here but I just picked up a job at NAVISTAR in Lisle, IL. I was born up here and have lots of family up here so I'm not TOTALLY new to the area... but the car is new to the area. :P
About the car:
2000 AP1
214k miles (and counting)
Comptech N1200 kit- aftercooled, Comptech airbox, 3.6" pulley (Might be 3.4... I forget...), 17.8 psi, upgraded heat exchanger, Cobra pump.
Walbro 255
ID1000s
AEM EMS V2
AP2 retainers and oil jets
ACT pressure plate, stock clutch/Flywheel
Test pipe
Tanabe Medallion Concept G exhaust
blah blah blah...
My build thread is severely out of date but you're welcome to browse through some of the finer details.
I'm in the Lombard area if anyone needs a hand or to just grab some food.
Winter plans:
SOS throttle body.
Clean up the ports on a spare intake manifold and powdercoat it.
PLM header Coated with Swain-Tech's White Lightning coating.
Radium Engineering fuel rail and everything to hook it up.
Work on lowering IATS and heat soak (Just cut hood vents into a spare hood as a start).
ABS/ driver's side wire harness relocation.
Have Josh (AP1Chief) keep tweaking my tune.
Cleanup wiring and anything else I can think of while I'm not driving it.
Powdercoat the aftercooler/intake/some brackets
Get some more fresh air to the air filter.
Thanks!
Last edited by Wolf95; 10-04-2018 at 07:38 AM. Reason: addition
#5
Registered User
Thread Starter
Thanks! It just keeps on climbing!
Thanks! appreciate it.
I need more friends to tinker with up here. Feel free to hit me up on Instagram (@s2killer) or Facebook: Jason Silver for some meet ups or garage days!
#6
Welcome back.
I have a friend and high school acquaintance that works for Navistar as well - I believe in Lisle too.
Maybe I'll see you around, I'm in the 630 though haven't taken the S2000 out for nearly two years.
I have a friend and high school acquaintance that works for Navistar as well - I believe in Lisle too.
Maybe I'll see you around, I'm in the 630 though haven't taken the S2000 out for nearly two years.
Trending Topics
#8
Registered User
Thread Starter
[left]
Nice! Lol
gimme a last name and I’ll shoot him an email. Lol.
Im renting now so taxes aren’t my problem, atm... it’s rent.
Im renting now so taxes aren’t my problem, atm... it’s rent.
Thread
Thread Starter
Forum
Replies
Last Post
anothersilver
Member S2000 Classifieds and For Sale
1
01-14-2016 06:47 AM