S2KI Honda S2000 Forums

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)
-   Wheels and Tires (https://www.s2ki.com/forums/wheels-tires-56/)
-   -   Where did the PF01 thread go? (It has been added to this thread) (https://www.s2ki.com/forums/wheels-tires-56/where-did-pf01-thread-go-has-been-added-thread-910296/)

wutah 08-20-2018 04:49 PM


Originally Posted by DanielZan (Post 24501977)
OK,

So I re-read the whole thread and did some research. I am going to go most likely with staggered:

17x9+60 (rear)
17x8+50 (front)

I will eventually run 225/255 tires, but for now I will use my stock 215/245 tires until they run out. The car will see mild street use (not daily driver).

If any of you experts see something wrong with my planned set-up above, please let me know!!!

Thats what I did but I did the SS on the rear and am running 225/255

I did this setup so I wouldn't have to roll fenders or anything and it works perfect even at the track this past weekend!
https://cimg9.ibsrv.net/gimg/www.s2k...f003d397e7.jpg

DanielZan 08-25-2018 02:04 AM

are you stock height?

treimche 09-03-2018 01:29 PM

Does anyone know of another center cap that will fit the 17" PF01? I bought mine used, so didn't get any center caps with them. All I can find is that they're like $40 each if I bought the Enkei caps new. That's half of what the wheels cost me.

brc80 10-24-2018 11:41 AM

Thinking about pulling the trigger on these wheels as well, and have been driving myself crazy with fitment questions. Would I be safe going 17x9 +60 all around with either 255 square or 245/255 on stock fenders with maybe an inch drop at the most. 100% street driven, weekend car.

Thanks

Manga_Spawn 10-24-2018 01:39 PM

You'll still need to be careful but it should be fine. Just be careful of places where you have the wheels turned and the suspension compressed. Stock height minimizes the risk but when you lower it it becomes more of an issue.

brc80 10-24-2018 01:56 PM


Originally Posted by Manga_Spawn (Post 24525127)
You'll still need to be careful but it should be fine. Just be careful of places where you have the wheels turned and the suspension compressed. Stock height minimizes the risk but when you lower it it becomes more of an issue.

Thanks, plan is do the wheels now, and see if i think it needs a slight drop. Would 255 all around be ok? 245? A 245/255 stagger?

Again thanks for the input.

Manga_Spawn 10-24-2018 03:26 PM

255 is doable all around but again when it is lowered requires being more careful. Having the little extra room with the 245 can be nice. At stock height the chance of it catching is still really low due to how much suspension travel there. I usually recommend starting with the narrower tire and seeing how much space there is any you can alway get wider tires the next go around.

06LagunaBlue 12-09-2020 08:14 AM

Anyone have any more pics of PF01s on S2ks? Specifically on LBP? I can't even find that on google.

Any way, I just ordered the 17x8 +50 and 17x9 +63 with 225/45/17 and 255/40/17, all stock. I'll post pics in a few weeks once they are on the car!

Thanks for all the info here!

robjoshua228@yahoo.com 01-13-2021 03:37 AM

Hi, did you pull the trigger and had these wheels installed on your car? these are the wheels I am exactly interested in . . . . I have no desire at all to roll the fenders, let aside lowering the car :D

matrix_squared 04-23-2021 08:27 AM

following


All times are GMT -8. The time now is 04:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands