When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FS: MINT 06 drivers seat, F1Spec Racing Seat, Nagisa Rails, OEM oil pan, etc
All parts located in Windsor California (Sonoma County).
2006 OEM Drivers Seat (Mint condition, 20,000 miles) - $400
Non-smoking. Hate to sell this because I know I will never find another this nice, but at this point I've accepted that I'm never going back to stock and it's been taking up room for years.
F1Spec Type 5 Racing Seat (Fair condition) - $120
Solid seat for street and track use. 5/6 point harness compatible. Fits the S2000 with ease (blocks nothing, can still access OEM belt buckle and slide the seat back and forth). I'm a 34" waist and this fit me snug but not uncomfortable (I've spent 6-7 hours in this seat in a day). Small wear hole on outer back edge of fabric (pictured, not visible when installed). Cleaned, bagged, padded and boxed up for the buyer.
Nagisa Auto D-Lock Super Low Driver's Seat Rail - $200
Fits all years. Excellent condition, purchased from YamahaSHO several years ago and never used. Huge step up in quality over the Buddy Club rails everyone uses.
OEM Oil pan - $150
Fits all years, comes in OEM box. From a 2006 with 57,000 miles. Excellent condition, includes drain plug, ready to bolt on or weld in a baffle.
APR wing endplates - $40
Aluminum with stock carbon fiber wrap. From a 250 but should fit any APR. A few marks, picture is overexposed so you can see them better.
Topeak Shock Pressure Gauge - $20
Shraeder valve, rotating screw on with bleeder button. Reads to 300 psi so this is what you want to check and bleed pressure from shock absorbers. Used once.
Verizon Samsung Network Extender 3G - $180
Your own little cell tower. Adds Verizon 3G voice/data plus 911-GPS location services to any broadband connection. Handles 8 calls at once. Currently for sale on Amazon for $350. We used it for our home in the mountains where there was no service otherwise. Works like a charm.
OEM Frame braces (soft-top motor location) - $20
Sold:
Swift Racing coilover springs 12K/10K (shipped)
custom valved Bilstein PSS shocks (shipped)
Eibach adjustable rear sway bar
Gladman Performance rear tie bar (shipped)
Gladman Performance strut tower bar
Litespec full Titanium 70mm exhaust
Buddy Club AP2 passenger seat rail (shipped)
F1spec Type V racing seat
stock AP2 exhaust
stock header
stock AP2 intake
Does the seat work with the OEM seatbelts, or are harnesses required?
Original receipts? I know it's brand new, but how long ago did you buy it?
Also, are you flexible on the price? Keep in mind that $400/pair is F1Spec's price shipped. Pick them up in South San Francisco they knock $50 off making it $350 for the pair. So at $175 for one seat its the same as your asking?
The seat works with OEM seatbelts as well as harnesses. You just move the buckle onto your new rail and unbolt the lower tether to feed it through the lower side seat hole and you are good to go. Belt is still firm on your body. I crashed my car in my seat and the belts and airbags worked perfectly.
I don't have my receipts but both were purchased almost exactly one year ago. The seat has been collecting dust in my living room since then. My girlfriend is moving in and doesn't want car parts in the living room.
I'm gonna be firm on the prices. The seat is still roughly half the cost of f1specs cheapest single seats. If you want two seats then you can buy them from f1spec but many people only want one. Compared to what people sell their bling seats for this is outrageously cheap.
10-10-2011, 03:59 PM
FS: MINT 06 drivers seat, F1Spec Racing Seat, Nagisa Rails, OEM oil pan, etc
I will try to get a pic up tomorrow of my driver seat in my car.
