Mark this thread as Sold
*** Fully Caged AP1 $5900 ***
Up for sale is my 02 Honda S2000 fully caged and ready for completion. The car was intended for SCCA road racing in ITR and is a great candidate for anyone wanting to go that route or some other wild track day monster. There is simply not enough time to complete the car with my current schedule.
The hardest and most expensive part of the build is done, the cage. It has 8 mounting points per the GCR just like the Spec Miatas we build. All the main aspects and required braces are 1 ¾” .095 wall. The front and rocker boxes are tied in along with the firewall/foot well areas on both sides. Nascar style door bars on both sides.
The car itself was purchased from an insurance company. The bags were blown along with damage to the hood, bumper cover, bumper support and plastic under tray. except for a front bumper, I have all the other pieces to complete the car. The rear bumper was torn and has been replaced with an ap2 rear bumper.
There was ZERO frame damage. Several of the under hood and undercarriage pics below show how straight and clean the car is with zero rot. There was some paint flaked off of the lower rear rocker seam but it is extremely solid throughout.
The car has 162k miles on it. It runs and is lot drivable with no noises or smoke and idles as smooth as can be.
What you see in the pics is what you get other than the windshield which was removed for the cage and will be included. Other than the basic dash parts and cluster parts, there is nothing else left to the interior.
The drivetrain, suspension, brakes, etc. are completely stock and untouched.
$5900
Car can be delivered to your door for $1.50 a mile one way from 18704 zip code.
Very important!
Feel free to email me at marccefalo@gmail.com or call me directly at 570 262 1013 with questions.
DO NOT PRIVATE MESSAGE ME.
I can respond to your emails on the fly with the blackberry or your calls even sooner. I will not respond to private messages. It takes too much time to drop what I’m doing to log in and then respond.
Thanks for your interest!
Marc



































The hardest and most expensive part of the build is done, the cage. It has 8 mounting points per the GCR just like the Spec Miatas we build. All the main aspects and required braces are 1 ¾” .095 wall. The front and rocker boxes are tied in along with the firewall/foot well areas on both sides. Nascar style door bars on both sides.
The car itself was purchased from an insurance company. The bags were blown along with damage to the hood, bumper cover, bumper support and plastic under tray. except for a front bumper, I have all the other pieces to complete the car. The rear bumper was torn and has been replaced with an ap2 rear bumper.
There was ZERO frame damage. Several of the under hood and undercarriage pics below show how straight and clean the car is with zero rot. There was some paint flaked off of the lower rear rocker seam but it is extremely solid throughout.
The car has 162k miles on it. It runs and is lot drivable with no noises or smoke and idles as smooth as can be.
What you see in the pics is what you get other than the windshield which was removed for the cage and will be included. Other than the basic dash parts and cluster parts, there is nothing else left to the interior.
The drivetrain, suspension, brakes, etc. are completely stock and untouched.
$5900
Car can be delivered to your door for $1.50 a mile one way from 18704 zip code.
Very important!
Feel free to email me at marccefalo@gmail.com or call me directly at 570 262 1013 with questions.
DO NOT PRIVATE MESSAGE ME.
I can respond to your emails on the fly with the blackberry or your calls even sooner. I will not respond to private messages. It takes too much time to drop what I’m doing to log in and then respond.
Thanks for your interest!
Marc



































Originally Posted by rogueXevolution,May 13 2010, 08:43 PM
would any type of top be able to clear the cage?
marc



