R&C Parts For Sale Used parts for sale by members only
Mark this thread as Unsold

Track S2000 for sale -project

Thread Tools
 
Old 09-14-2016, 07:06 PM
  #1  

Thread Starter
 
patinum's Avatar
 
Join Date: Nov 2004
Location: Second City
Posts: 5,578
Received 17 Likes on 6 Posts
Default Track S2000 for sale -project

I've decided to actively try to sell my S2000(s).

1) 2006 S2000 rebuilt title prepped for TTC that dropped a valve (will be referred to as "Track car")
2) 2006 S2000 in rear end collision purchased for the motor. (Will be referred to as "donor")

Looking for $17k obo for both cars and spares. You could probably make back $2k from parting out what you don't need from the donor.

Track Car:



Track Car
Gingerman lap record holder (1:40.048). Does 1:43's on BFG Rival (non-s)
Autobahn South - half second behind lap record
Rebuilt title
Color - lots
- original color was suzuka blue. I purchased with mismatched panels. Front bumper, both front fenders, both doors, and hood have been replaced with Laguna blue panels. Lots of chips but all the same color from 2 cars. I wrapped the back black and added some stripes. Looks pretty good but the wrap job isn't great because I did it myself. Car will come with spare doors, fenders, and hood.

Gutted from the seats back
Removed radio
Removed airbags (still have)
Removed center console
welded in custom 4pt roll bar by Red Mist
Gt motoring Carbon fiber hardtop with lexan rear window (probably one of the lightest roofs made)
Kognition chassis mount wing
AST 4100 shocks - aluminum (could use revalve)
Berk UHV titanium Exhaust
Plm header and test pipe
Custom intake by ProFunction
Hondata Flashpro with Mikey tune
Girodisc 2 piece rotors (3 track days)
Brake ducts (may need new ducting)
Enkei rpf1 17x9 +45 - 1 set
Enkei pf01 17x9 +60 - 1 set
Enkei rpf1 17x9.5 +38 - 1 set
Tr motorsports 17x9 +62 - 1 set
Hoosiers R7 225 - 10(?) Used
Maxxis Rc1 235 - 6(?) Almost new
Big rival - pretty much done
Re71r - pretty much done
Delrin bushings for added camber
Sparco evo seats (expired for w2w)
Sparco steering wheel
Gforce harness (expired for w2w)
Stealth hitch
Spare fenders
Spare hood
Spare doors
Wasp splitter (not currently installed)
Spare upper control arms with offset bushings.
New in box Canton oil pan
New in box billet innovative motor mounts
OEM radio (out of the car)
OEM steering wheel (out of the car)
OEM air bags (out of the car)
Rear wheel bearings replaced this year. (3 track days)
Yearly diff, trans, and brake fluid flush.
Clutch feels good.

Race trim wass 217whp @ 2715lbs. (Dyno'd at 215 with a BIG bump in the midrange)

Issues with the track car:
Was rebuilt tile when I bought it. Found damage to front passenger side under the fender and Bondo on drivers door (replaced the door) and rear fender.
Not getting as much camber as expected with the offset delrin bushings. Got the frame pulled to spec and was able to get closer but not quite as much as expected. Was going to transfer the subframe from the donor. Offset ball joints should be able to get you as much as you need.
Removed windshield wiper fluid tank
Grease leaking from axle boot. Got a replacement duralast boot and also one from the donor.
Rear trunk was cut for chassis mount wing - didn't do a great job cutting.
Front abs/speed sensor was stuck and snapped so I cut the cable. Can replace from donor.

What I think went wrong: When running Hoosiers I would occasionally lose power coming out of a double apex hairpin. Thought this was fuel starvation since I would run low fuel to minimize weight. Retrospectively this might have been oil starvation (hence the new oil pan).

I started to disconnect everything for the swap. I'm still going to work on it but if someone wants to finish the project is be greatful$

Donor car:


Donor car:
2006 s2000 with 83k miles
Rear passenger collision.
Bought from previous owner at the tow yard.
Drove the car onto a the trailer.
Took out the soft top and sold.
Digging through the car I didn't find evidence of any aftermarket parts.
Parted out some random interior parts (including the center console)
Sold passenger fender
Front bumper and drivers fender are scratched and dented.
Doors are good
Drivers seat torn. Passenger is good.
Airbags intact.
Started to take out the dash but haven't remove the steering wheel yet.
Headlights sold
Wheels are scuffed. 1 has some deep scratches
Car is definitely good for parts for the track car as well as make some money from parting out.
patinum is offline  
Old 09-15-2016, 05:51 AM
  #2  
Registered User

 
No.Division's Avatar
 
Join Date: Dec 2014
Posts: 181
Likes: 0
Received 2 Likes on 2 Posts
Default

Nice car, GLWS!
No.Division is offline  
Old 09-15-2016, 08:12 AM
  #3  
Former Sponsor
 
THMotorsports's Avatar
 
Join Date: Feb 2012
Location: Chicago
Posts: 3,739
Received 29 Likes on 24 Posts
Default

The car is legit. I've seen it run in person.
THMotorsports is offline  
Old 09-17-2016, 11:39 PM
  #4  

 
ino20's Avatar
 
Join Date: Nov 2011
Posts: 314
Likes: 0
Received 3 Likes on 3 Posts
Default

Sad to see this for sale
ino20 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Curated Content Editor
S2000 Talk
0
01-02-2019 02:39 PM
Curated Content Editor
S2000 Racing and Competition
9
07-05-2017 11:50 AM
Ruthernerd
UK & Ireland For Sale and Wanted
0
03-22-2016 11:36 AM
#172CR
Oregon S2000 Owners
10
03-23-2012 07:40 PM



Quick Reply: Track S2000 for sale -project



All times are GMT -8. The time now is 01:01 PM.