Rota wheels
#13
I though you did . Cause the hub bore on the rota grids are 73.1. The hub size on the front of our car is 70.3 and the rear is 64.1? Someone correct me if I'm wrong.I just did some reading and alot of guys aren't using them on aftermarket wheels because the aftermarket lugs will help center the wheels .
good to know! Also jordannn, what size tires are you using on yours? and are you lowered? my 245/40's should be here tomorrow or thursday and once they're all on and set, ill post up here and show you
#16
Centering rings move the load off the studs and onto the wheel hub.
https://www.s2ki.com/s2000/topic/785...n-wheel-studs/
https://www.s2ki.com/s2000/topic/785...n-wheel-studs/
#17
Thread Starter
Join Date: Apr 2011
Location: Olyphant, Pa
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jordannn93' timestamp='1313517951' post='20883443
I though you did . Cause the hub bore on the rota grids are 73.1. The hub size on the front of our car is 70.3 and the rear is 64.1? Someone correct me if I'm wrong.I just did some reading and alot of guys aren't using them on aftermarket wheels because the aftermarket lugs will help center the wheels .
good to know! Also jordannn, what size tires are you using on yours? and are you lowered? my 245/40's should be here tomorrow or thursday and once they're all on and set, ill post up here and show you
#18
I WAS slammed on coilovers but not anymore with these bad boys. I had to raise it up to make them fit for now. Still gotta do my rear bumper tab next weekend ( barely rubs as it sits now with one finger gap) and then ill dial in some camber and get the fenders semi flush with the tires and call it a day