S2KI Honda S2000 Forums - Ruut's LS powered widebody build

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)

- Automotive builds (https://www.s2ki.com/forums/automotive-builds-284/)

- - Ruut's LS powered widebody build (https://www.s2ki.com/forums/automotive-builds-284/ruuts-ls-powered-widebody-build-1022292/)

:blink:

Quote:

Originally Posted by ruut (Post 22544726)

Quote:

Originally Posted by baZurk' timestamp='1368634308' post='22544144

[quote name='ruut' timestamp='1368623384' post='22543692']
18x10 et35 front with 295/30/18 r888s
18x12 et24 rears with 335/30/18 r888s

Can I fit these with a roll? J/K Can't wait to see this done. It will be a beast. Good luck!

I doubt you can get that much roll. :D Here is a better angle.
https://farm9.staticflickr.com/8440/...5bb68ef7_b.jpg
[/quote]
:blink: How much width does the widebody add?

Quote:

Originally Posted by clarkster009 (Post 22544743)

:blink:

Quote:

Originally Posted by ruut' timestamp='1368647782' post='22544726

[quote name='baZurk' timestamp='1368634308' post='22544144']
[quote name='ruut' timestamp='1368623384' post='22543692']
18x10 et35 front with 295/30/18 r888s
18x12 et24 rears with 335/30/18 r888s

Can I fit these with a roll? J/K Can't wait to see this done. It will be a beast. Good luck!

I doubt you can get that much roll. :D Here is a better angle.
https://farm9.staticflickr.com/8440/...5bb68ef7_b.jpg
[/quote]
:blink: How much width does the widebody add?
[/quote]
It's either 35 or 50mm but I may have to add fenders to it. I like the J's but not sure how over fenders will look added to a widebody. I will have to play it as it goes. The widebody will be delivered tomorrow. I just made the delivery appointment with the shipping company.

So, Everyone has evaluated the tires and come to the conclusion that I am some sort of meat fanatic, while this is true I have chosen the tire sizes for a reason. I will lay out some specs for the build to explain.

Goal weight for the car is 2380 lbs(with cage).
Estimated specs for the current engine. 425-450 hp and 430-450 tq.

It will more than likely have a SC on it in the next year or so and be at 650ish HP. The car is being built for track days and Autox. The track and Autox set up is 18x10.5 et 37 with 315/30/18 Hoosioer A6s Square. The only down side to the project is the width but I feel like it ls a good set up based on other S2ks I have set up with stock power plants.

I know a lot of people feel a LS swap S is blasphemy but this car was in a light wreck and I felt that is was a proper candidate for such a project. It really is just to build a S that fits in the WTF is that category. I had a MY00 prior to this project and I loved the car but wanted something a bit on the radical side just to see how far I could take it and still have usable power.

This the car I had before this project.
https://farm9.staticflickr.com/8226/...18e4c619_c.jpg

Body kit was just delivered. Took a minute away from working and played with it a bit. The test fitting will continue later.

https://farm8.staticflickr.com/7288/...78ac17ee_b.jpg

https://farm8.staticflickr.com/7283/...19c28c04_b.jpg

https://farm8.staticflickr.com/7288/...2ef81875_b.jpg

Wow looks good.what is it made from ?

Quote:

Originally Posted by Lttakas (Post 22547630)

Wow looks good.what is it made from ?

Fiberglass, I wanted fiberglass because it is so easy to mod and fix.

I had my eye on this for a while its a very nice looking body.i just like the lines on it.how is the fit ? I just might pick one up

Quote:

Originally Posted by Lttakas (Post 22548020)

I had my eye on this for a while its a very nice looking body.i just like the lines on it.how is the fit ? I just might pick one up

So far it all looks good except the rear quarters but I haven't really gotten into it yet. I will keep you posted on how it fits.