Tech Day! Tech Day!
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Asheboro, NC
Posts: 2,928
Likes: 0
Received 0 Likes
on
0 Posts
Tech Day! Tech Day!
With the summer season rapidly approaching, I believe its time to prepare our cars accordingly so we do not encounter any unexpected mishaps if possible...
Nothing major here, just diff. and tranny drain and fills... Maybe air filter and cabin filter changes... And anything else that needs to be addressed... I may have my exhaust in and possibly try to install that as well...
Sorry for such short notice, but looks like this Sat. June 24th at 10am at my shop in Asheboro is the location... Nothing fancy or enormously big... just inside out of the sun on level concrete floor... Probably get 5-6 cars in at a time with decent room to work...
Like to have everyone meet at the Lowes Food/Biscuitville parking lot on Hwy. 64 around 9:30am then follow me to shop...
G'boro gang: Take 220S into Asheboro, look for 64E.(Siler City/Raleigh exit) on right... 25mph sweeping curve exit here so take it easy, then stay in right lane until first stop light at Biscuitville and turn right into parking lot... Meet by Huddle House...
Nothing major here, just diff. and tranny drain and fills... Maybe air filter and cabin filter changes... And anything else that needs to be addressed... I may have my exhaust in and possibly try to install that as well...
Sorry for such short notice, but looks like this Sat. June 24th at 10am at my shop in Asheboro is the location... Nothing fancy or enormously big... just inside out of the sun on level concrete floor... Probably get 5-6 cars in at a time with decent room to work...
Like to have everyone meet at the Lowes Food/Biscuitville parking lot on Hwy. 64 around 9:30am then follow me to shop...
G'boro gang: Take 220S into Asheboro, look for 64E.(Siler City/Raleigh exit) on right... 25mph sweeping curve exit here so take it easy, then stay in right lane until first stop light at Biscuitville and turn right into parking lot... Meet by Huddle House...
#2
Registered User
Join Date: Jun 2003
Location: Asheboro, NC
Posts: 2,533
Likes: 0
Received 0 Likes
on
0 Posts
Brandon,
I will bring by fluid pumps, drain pan, empty jugs, wrenches or sockets...that are needed.
After I finish work Saturday....I will stop by and see if anyone wishes to go for a spin.
I will bring by fluid pumps, drain pan, empty jugs, wrenches or sockets...that are needed.
After I finish work Saturday....I will stop by and see if anyone wishes to go for a spin.
#7
Registered User
Thread Starter
Join Date: Mar 2006
Location: Asheboro, NC
Posts: 2,928
Likes: 0
Received 0 Likes
on
0 Posts
Mornin' guys...
Listen, if 10am seems too early for folks, we can make it 11am or 12pm...
Just said 10am to be sure to get everything done in enough time to meet up with Steve in the afternoon...
I'm not sure how long it may take us, but its no prob to shoot for 11am-12pm with me... I know how Dolemike can lose track of time on the weekends...
What u guys think???
Listen, if 10am seems too early for folks, we can make it 11am or 12pm...
Just said 10am to be sure to get everything done in enough time to meet up with Steve in the afternoon...
I'm not sure how long it may take us, but its no prob to shoot for 11am-12pm with me... I know how Dolemike can lose track of time on the weekends...
What u guys think???
Trending Topics
#8
Registered User
Thread Starter
Join Date: Mar 2006
Location: Asheboro, NC
Posts: 2,928
Likes: 0
Received 0 Likes
on
0 Posts
Also, Id like to paint my calipers red and repaint my fender linings black as well... Anyone have any good paint for this... I'll pay you for it, or where's a good place to get a can of each that will last...???
#9
10am is going to be a little early for me, I have a honey-do list tomorrow morning, so 12 sounds better for me. I have red caliper paint but if you put it on tomorrow you will have to wait if go on a drive. you can pick this paint up at any autozone or what not