I am planning on installing a set of CR springs and shocks this Sunday. Help would be greatly appreciated( especially experienced help). So if you're bored or just feel like getting dirty come on down. As an added benefit, I have a lift and if you need fluids changed now would be the time. Thanks.

 

MhMmMmMMm..... I've done like 5 springs and shocks, but DE is far. fluids can be done with a jack stand. mhmm....

I think Matt would have it down.

 

HA! i still have no clue how to do it. i just know i couldnt do it myself becuase I don't have a torque wrench and the torque specs for all the nuts/bolts.

I will come help/stand there but don't count on me knowing how to do it

 

Come up for the BBQ and we can do it at JFO's or my place. I need to do my fluids soon anyway.

 

There is a DIY write up somewhere here on S2KI. Simple and straight forward. You don't need help, just determination.

 

Its a very easy and fairly simple install. I've done many suspension swaps.

I would help, but Sunday is going to be a hang over day with out a question

 

i have to work sunday's but if it were a griday or a saturday and you covered food and beer i wouldn't mind helping. it's a far drive for me though...

 

friday.... i'm a little drunk right now sorry

 

Should only take an hour and a half at the most cause it's a direct swap with top hats already on the CR shocks and springs. Again wish I could help, maybe next time Bill.

 

I did springs swap myself a week ago and it took me 3 hours.
Pretty straightforward

Here is a link I used mainly as DIY.
http://www.s2000turbo.com/index.php?option...id=92&Itemid=27