Need ideas
Ive got an 01 s with a blown motor as a result of hydrolock. Theres been a bunch of ideas about where i should go from here. What to replace it with, how, and by who. So im looking for input. Heres the controls in this exoeriment...
-Budget of 10k or less
-Located in philadelphia
-Needs to be street driveable ( not a trailered car )
-needs to run on street octane ( 94 east coast )
-needs to make highway runs (nyc and back)
-not ruling out just droping a stock motor and working on the body
-not ruling out leaving the body alone and droping 10k on the motor ( or motor and turbo, motor and sc etc...)
so, any ideas?
-Budget of 10k or less
-Located in philadelphia
-Needs to be street driveable ( not a trailered car )
-needs to run on street octane ( 94 east coast )
-needs to make highway runs (nyc and back)
-not ruling out just droping a stock motor and working on the body
-not ruling out leaving the body alone and droping 10k on the motor ( or motor and turbo, motor and sc etc...)
so, any ideas?
I would like to know this also because my engine smokes at high rpm but only in 5th and 6th gear so im looking to either buy another engine or build the one in my car. But i also thought about maybe putting in the 2.2L. Is the F22C a viable option? How hard is it to swap in? Or does anyone know.
Sorry wasn
Sorry wasn
call hardtop guy up and get a crate motor
if not go spoon crate motor...why take the risk to have a shop not balance and blue print the new motor, get something all ready built with a recipt...
if not go spoon crate motor...why take the risk to have a shop not balance and blue print the new motor, get something all ready built with a recipt...
yeah hardtop guy was an option from the geto go. hes in cleavland tho but thats not so bad. Spoon motors are good but if i was going to go the recit way i would just have laskey rebuild mine. i havnt heard a bad thing about them. i guess hardtop guy and a create motor might be the way to go. i just wanted to try and go bigger i guess
PS> an f22c would pick you up about 10ftlb of tourqe, an 8000 rpm red line, and a better tranny. The swap is bolt in from what ive heard but im saying this on hearsay having never done one
PS> an f22c would pick you up about 10ftlb of tourqe, an 8000 rpm red line, and a better tranny. The swap is bolt in from what ive heard but im saying this on hearsay having never done one
Trending Topics
Originally Posted by Gink5,Feb 1 2006, 07:57 AM
just curious...... did you have a unbrella and block the drain hole?







