OOP's deleted accidently trying to edit
Gendron specs; Alignment ( all numbers with driver in place)
Front canber + -1.75 degrees ( or as close as possible, equal side to side)
Front Caster = + 4 degrees or as much as possible without losing camber setting
Front toe = 0-1/16 out total
rear camber= -2 degrees ( or as close as possible, equal side to side)
Rear toe = 1/4" in total

 

Front and rear please - with toe

J

 

Your car is on rails now. What do you want a 2.0 G car!

 

Was having computer problems had to reboot. Think it's all there now right?

 

I am VERY happy with the way my S handled and will handle after Bobby tweaks it a little after the sc install. It is a little nose heavy now and wedged to the right front but a few bumps here and there and the S will be back on rails - just a ship load faster!

J

 

That is very close to what I run. Camber and caster are the same but I run -0.3 front and -0.4 rear on toe (I think!) My S and Jeff's S are the same on settings so he might be able to confirm...

J

 

Sounds good