I am going to need some help or and installer to take on the job for me. Volunteers and i'll start with what i can do now. Or is it something that should be left to the pro's.

 

Did it come with instructions?

I'd like to see how it goes in...and I can help with some of the interior. I'll be passing through DB on Saturday on the way to Melbourne. Otherwise, the following weekend.

 

Thanks for the offer of help! I may start on it tommorow. Instructions are online at http://www.bethania-garage.com/contact.htm

 

The worst part is that damn center console/secret compartment crap from what I saw in a brief scan of the instructions.. now that I've done that a few times I can do it pretty fast, but that first time I had to do that.. serious pain in the a$$.

 

It seems you have found a Guru!

 

We will be installing one of these real soon, keep us posted.

 

2NR if you were on this coast you would already have this car setting it up. My confidence is not at a high so looking for an installer.

 

I can tell him how to do that part, haven't installed a bar previously into an S though. If you want to keep as much interior as possible it will require some cutting, which is why i normally just remove the interior from my cars when I put a bar or cage into them

 

The roll bar looked a little tedious, but not impossible. We like a challenge!

Dayton Beach is not so far, we get customers from Georgia and Alabama driving down here.

Good luck with the install, keep us posted!

 

Todd - I will be at the auto-x next weekend in St. Pete. If you want to inspect the rollbar which I had installed by Hard Dog feel free. Of course I'll be down for the HGPSP as well in April.

Shay