Mark this thread as Sold
A/C relocation kit
Thread Starter
Registered User
Joined: Oct 2008
Posts: 1,637
Likes: 2
From: Portland oregon
A/C relocation kit
Located in Portland Oregon
And I only take paypal as payment. Unless your local and I take cash.
Plenty of vouches on kits I have sold.
I have a relocation kit available that reroutes the a/c lines out of the area where the turbo runs and around the motor out of harms way.
Includes the 2 hoses, all oem o rings, reduced barrier hose for maximun flexibility and all the fittings needed. Also the 1oz of pag oil to be placed back into the line so the proper level is achieved.
200.00 shipped or Trades are welcome as I need some parts look below
Also taking trades if you guys have some stuff I need or part trade part cash. Looking for:
1000cc Id injectors
dbw flash pro
dual pump hanger
lug nuts (no red lugs)
The kit runs behind the motor and around to keep all the ac lines on the drivers side of the engine bay. You can also switch it around and run it around the passenger side if you would like.
Here are a few pics of my kit and an install on camuman (anthonys) car. Her has an sot kit and what a mess it makes of the engine bay.
His install thread: https://www.s2ki.com/forums/index.ph...pic=724920&hl=
Before on camumans car
After on the same car
Heres a kit just sitting in place to show you the routing on the passenger side
This is the high pressure line running next to the oem compressor lines on a drivers side routing
These lines are not tucked away like they should be under the intake mani closer to the motor and lower on the firewall
Joined: Mar 2008
Posts: 1,053
Likes: 0
From: culpeper va
im very interested in this both since im going boost and i want to do a wire tuck ! so i was wondering if this is long enough to route under the passenger side fender? if not would you be willing to make them long enough to do so ?
