Mark this thread as Sold
Complete Inline Pro Turbo Kit with Extras!
Inline Pro Stage 1 Kit (Charge Pipes, IP BOV, Down Pipe, Couplers etc…)
Log Style Manifold
Precision 59-65 BB
Precision 600hp Intercooler
Turbosmart 38mm Wastegate
SOS 3-Bar Map Sensor
AEM Series 2 EMS
AEM D-Plug with wiring already ready
AEM Boost Solenoid
AEM Oil Pressure Sending Unit
AEM UEGO with Gauge
New Filter
Defi Boost Gauge
SOS Dual 52mm POD A-Pillar
Siemens 675cc Injectors (with clips )
Inline PRO Oil Filter Relocation Kit
Oil Feed and Return Kit and Fittings
Inline Pro 3 Inch Exhaust from DP to Rear Single Exit
Oil Pan with Tap and Angled Fitting
100ft Black Header wrap (Downpipe already wrapped)
I hate to sell but I’m moving to a new house with a FAR commute to work and will possibly be getting rid of the S as well. I will post photos when I pull the kit off. Located in Chicago, IL.
It made 310whp at 8psi on my stock F20 with a super dirty filter. I’ve since upgraded the filter and can already tell it's breathing better. The car was tuned by AMS in Chicago for reliability. If you have an AP1 this kit will be a bolt and go. Or add an inline pro 3mm head gasket and up the boost for some serious power. You’re getting the turbo kit, full exhaust, gauges, tune, EMS, injectors, clips everything.
Would like $4500 shipped and paypalled for all above.
I'm not interested in parting this out. This literally includes EVERYTHING you need minus fuel pump and spark plugs.
NO shaft Play, No issues, everything is in good working order. Very rare that you'll find a complete kit on s2ki with everything needed to go FI and do it right. I’ve sold tons on here including 2 hard tops, bride seats, 4 exhausts, rims so buy with confidence. 350+ sales on ebay with 100% feedback. As always I can accept cash or paypal if you want to put some on your credit cards. PM me if you have any questions.
Here's the picture before I installed the kit. I removed the black paint on the intercooler so it's now back to silver.

Exhaust picture


Log Style Manifold
Precision 59-65 BB
Precision 600hp Intercooler
Turbosmart 38mm Wastegate
SOS 3-Bar Map Sensor
AEM Series 2 EMS
AEM D-Plug with wiring already ready
AEM Boost Solenoid
AEM Oil Pressure Sending Unit
AEM UEGO with Gauge
New Filter
Defi Boost Gauge
SOS Dual 52mm POD A-Pillar
Siemens 675cc Injectors (with clips )
Inline PRO Oil Filter Relocation Kit
Oil Feed and Return Kit and Fittings
Inline Pro 3 Inch Exhaust from DP to Rear Single Exit
Oil Pan with Tap and Angled Fitting
100ft Black Header wrap (Downpipe already wrapped)
I hate to sell but I’m moving to a new house with a FAR commute to work and will possibly be getting rid of the S as well. I will post photos when I pull the kit off. Located in Chicago, IL.
It made 310whp at 8psi on my stock F20 with a super dirty filter. I’ve since upgraded the filter and can already tell it's breathing better. The car was tuned by AMS in Chicago for reliability. If you have an AP1 this kit will be a bolt and go. Or add an inline pro 3mm head gasket and up the boost for some serious power. You’re getting the turbo kit, full exhaust, gauges, tune, EMS, injectors, clips everything.
Would like $4500 shipped and paypalled for all above.
I'm not interested in parting this out. This literally includes EVERYTHING you need minus fuel pump and spark plugs.
NO shaft Play, No issues, everything is in good working order. Very rare that you'll find a complete kit on s2ki with everything needed to go FI and do it right. I’ve sold tons on here including 2 hard tops, bride seats, 4 exhausts, rims so buy with confidence. 350+ sales on ebay with 100% feedback. As always I can accept cash or paypal if you want to put some on your credit cards. PM me if you have any questions.
Here's the picture before I installed the kit. I removed the black paint on the intercooler so it's now back to silver.

Exhaust picture


Originally Posted by TurboCongo,May 25 2010, 02:15 PM
What would you need to make it fit an AP2?
Originally Posted by TRBOKEV,May 25 2010, 05:16 PM
It will swap right over to an 04-05. 06+ models would need injectors and flash pro though, but you could sell the AEM and injectors and have more than enough money to buy a new flash pro and injectors. 
Trending Topics
Originally Posted by JakenBake,May 28 2010, 06:32 AM
Any pics of the exhaust on the car?
I believe there might be some pics online as well but I'll snap a few when I get off work.
Originally Posted by JakenBake,May 28 2010, 08:13 AM
Awesome! Are you the first owner of the kit? How many miles on it?
I ended up replacing the manifold with a used one because the original one cracked when I installed it. ( I made a thread about it when it happened) IP said it was not a defect so I don't know what happened to it.
Other then the manifold everything else has super low miles on it. You won't be disappointed.


