First Name: Joe
Price: $2500 USD, plus shipping. Willing to negotiate on price.
Location: Hartford, CT
Contact: Comment or PM

Kit is for AP1s and is used, but does have extras/upgrades.

Kit:
- Paxton Novi 1000 Supercharger
- Fuel pressure regulator
- Air box w/ filter (airbox does have a small cut out from the previous owner)
- Air plenum
- Original water pump
- Original intercooler for kit
- Brackets, pulleys, wiring, hoses etc.

Upgrades:
- Science of Speed increase boost pulleys (x2)
- Grams 500cc injectors
- Larger intercooler
- Bosch water pump
- Turbosmart Kompact blow-off valve

There appears to be no play in the supercharger, everything is in pretty good shape with the exception of the small cutout on the air box from the previous owner (can supply picture). I do not have any dyno numbers as to the output of the kit.

I am willing to negotiate on a reasonable price. Shipping must be covered by the buyer.

 

Does it come with ecu? N how much ship to Sacramento, CA?

 

How many miles on the kit?

 

Update: The kit has the piggyback and i have the Walbro 255 the kit came with. If I have access still (interior still apart after soft top replacement) I will pull the Walbro 255 in my tank which has no more than a thousand miles on it.

As for the mileage on the kit, I am not sure. I have never had it installed, its been sitting in a box for the past three years. I can understand the concern with that so I am willing to take any picture or do anything to help provide the condition of the kit.

I am getting way more messages than I had previously anticipated, so make me an offer. I have someone interested that is local and would prefer to do this face to face if possible versus shipping the kit out but I will do so for the right amount. I've had a bad experience with PayPal before and getting messaged by people on here who have never made a post is a bit suspicious.

From what I see the shipping to CA would be about $150.

 

Do you know what makes this kit specific for ap1/f20c? I a have an ap1 with f22c(04) and wondering if it is compatible.

Thanks,
Julio

 

I am not 100 percent sure. The kit is discontinued after Comptech/CT Engineering went belly up. From everything I've read the kit is very high quality but I'd do a search on here for the difference.

I'm assuming the ESM/piggyback may be different?

 

Sounds good, thanks.

It looks like the following will have to to be modified or changed to fit the AP1 Kit on AP2:

• Pulley
• Air-box bracket
• Piggy-Back ECU(voltage - unless running stand alone)
• Fuel Pressure Regulator (re-calibrated)

Good luck bump!

 

So u bought the kit used 3yrs ago and u installed just the fuel pump? Whats the reason for selling it?

 

Does it include the original piggyback for the stock ecu?

 

Thanks

No, i ordered a new Walbro and installed it because I replaced the top and had easy access to the tank. Im selling it because I have too many other project cars and brand new parts just sitting around for the s2k as well. I have no idea when I'll get around to it using the kit.
Yes it does.