Forced Induction For Sale Forced induction kits and components classifieds.
Mark this thread as Sold

Polished Vortech v3 Tuner Kit

 
Thread Tools
 
Old Jul 10, 2012 | 12:34 PM
  #1  
spapdx's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 6,820
Likes: 2
From: Gresham, OR
Default Polished Vortech v3 Tuner Kit

***********SOLD************

I bought this kit on 8/16/11 and installed it a few weeks later. The kit has approx 5k miles on it. The first blower oil change was done at about 1,000 miles in, then the 2nd approx 2,000 miles after that, and it currently has approx 2,000 miles on the oil that is in it. I have one bottle of oil left that I am including with the kit, you can buy more from Vortech. The supercharge has zero shaft play, it is in perfect condition. I have always been very careful with the belt tension. When I was taking the kit off my car, I was very careful and took a ton of pictures that I will send to the buyer to assist with the install (vortech's pictures are horrible in their installation manual). I also took the time to label every hose with a letter that matches up to a letter on either the pump, reservoir, heat exchanger, or after cooler. Also, every bolt is taped (with blue painters tape) to where it goes. Installation should be a breeze. You are getting everything it would come with from Vortech, and also an extra smaller pulley. I have the stock pulley that comes with the kit (4.5" I believe), and I also bought a 4" ASP pulley which is currently installed on the blower (its only been on there for approx 1,500 miles). The filter could use a cleaning (I don't have a k&n cleaner kit), but other than that, this kit is perfect and ready to go.

What you need in addition to this tuner kit:
Engine management system (I am running AEM v2)
Injectors (I am running ID 1000's)
Fuel Pump (I am running walbro 255)
Tuning (Jeff Evans e-tuned my car and did a great job)


With the stock pulley my car made 300whp on a very low reading mustang dyno making approx 7lbs of boost.
With the 4" ASP pulley my car made 335whp on the same low reading dyno with approx 10lbs of boost. The biggest difference here was the added HP in the mid range. Boost comes on much earlier and really made a huge difference. I had to get new tires after swapping the pulley


I am located in Portland, OR and am willing to ship. I am assuming shipping will be approx $100+ by the time I go buy boxes and packing materials. So, I am asking $3250 picked up, or $3400 shipped (hopefully we can figure out a cheaper way to pay rather than paypal since they would take $100 of this, I would split it with the buyer, or we can work on a different method). You can email me at gavin.strech@gmail.com, text or call me at 503-806-5579, or pm me on here if interested. Selling because I am going turbo.
Old Jul 12, 2012 | 02:38 PM
  #2  
spapdx's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 6,820
Likes: 2
From: Gresham, OR
Default

up!
Old Jul 16, 2012 | 08:37 AM
  #3  
spapdx's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 6,820
Likes: 2
From: Gresham, OR
Default

Old Jul 19, 2012 | 11:02 AM
  #4  
spapdx's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 6,820
Likes: 2
From: Gresham, OR
Default

bump
Old Jul 24, 2012 | 02:05 PM
  #5  
spapdx's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 6,820
Likes: 2
From: Gresham, OR
Default

up!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eumylove
Forced Induction For Sale
21
Mar 8, 2014 09:57 AM
spapdx
Archived Member S2000 Classifieds and For Sale
17
Jul 25, 2012 10:53 PM
kp_vtekniks
Pacific Northwest S2000 Owners
3
Dec 6, 2010 09:23 PM
ap1s2000
Archived Member S2000 Classifieds and For Sale
7
Aug 23, 2010 12:22 PM
161MPHTOPSPDS2K
Archived Member S2000 Classifieds and For Sale
36
Dec 11, 2008 09:12 AM




All times are GMT -8. The time now is 12:51 PM.