Mark this thread as Sold
FS: Comptech Adjustable Front Swaybar
Thread Starter
Registered User
Joined: Jul 2002
Posts: 1,918
Likes: 0
From: Ottawa
FS: Comptech Adjustable Front Swaybar
Clearing up some parts after making some setup changes to the car.
Comptech Competition Adjustable Front Swaybar (Gen 2)
- 5 position adjustment from 162% to 278% stiffer than stock, reducing oversteer
- a must when going for wider front tires, or SCCA rules autocross
- $750 US
- thought Comptech closed shop, but this web page is still here for now
http://www.comptechusa.com/store/140235.html
The discolouration around the bolt holes is just rust from the adjustment bolt. I'll clean it up and send a better picture if you PM me.
For prospective buyers. Yes the bar is a Generation 2. The bar has no welded sleeves on the inner bar. There is no cracking after 3 years of autocross and lapping on race tires. Refer to this thread talking about Generation 1 problems and how to identify a Generation 2 bar.
Comptech Gen1 -> Gen2
Ztech heatshield --- SOLD
- red carbon fiber
- $100 US
http://www.ztecindustries.com/index.html
Comptech Competition Adjustable Front Swaybar (Gen 2)
- 5 position adjustment from 162% to 278% stiffer than stock, reducing oversteer
- a must when going for wider front tires, or SCCA rules autocross
- $750 US
- thought Comptech closed shop, but this web page is still here for now
http://www.comptechusa.com/store/140235.html
The discolouration around the bolt holes is just rust from the adjustment bolt. I'll clean it up and send a better picture if you PM me.
For prospective buyers. Yes the bar is a Generation 2. The bar has no welded sleeves on the inner bar. There is no cracking after 3 years of autocross and lapping on race tires. Refer to this thread talking about Generation 1 problems and how to identify a Generation 2 bar.
Comptech Gen1 -> Gen2
Ztech heatshield --- SOLD
- red carbon fiber
- $100 US
http://www.ztecindustries.com/index.html
Registered User
Joined: Jun 2006
Posts: 351
Likes: 0
