Joe Alaniz is no longer in business. Do not send him money or parts. He will keep and not return your parts and money.


April Update: No response to phone calls several times each week.



June 2010 Update: No response to phone calls several times each week. He is screening his calls as I get messages from people that are considering using him and have no trouble getting through to him. Beware, he will take your money and screw you out of your parts and money.

So many unanswered phone calls and messages. Joe is a total thief.

MARCH 2011 update, It's been another year and he refuses to pick up my calls. He is still taking money on other car sites.

January 24, 2015 update, It's been FIVE years and now an update, see the last post.


This head is freshly ported and polished by Joe Alaniz. This is the unobtanium and I have it in my possession. No wait, no worries.

The porting is a clone to the head I am running. Supertech oversized stainless steel valves (1.0mm exhaust, 0.5mm intake) with Eibach dual springs and custom titanium retainers. The head has new valve guides and seats. The head combustion chamber volume is close to stock.

Flow bench testing says this is an excellent head.

This head on a boosted S2000 will add about 12 to 15 percent more power. Just what you need for that added little bit. This is the best power adder (IMHO) hands down. Several of the local 400 rwhp guys have Alaniz heads on their cars.


$3000 outright. Shipping and insurance included to the lower 48. Paypal add $95.

I will credit back $600 for your good head in exchange.

This is a very rare item and should sell quickly so if you want it act now.

 

Just to add for the seller. The Alaniz head on a bone stock F20C, as in stock cams and pistons, made my friends landspeed car that has run 201mph make 240whp.

 

so, if this head were to be put on a 'bone stock' ap1, it would add power also? no loss in power on low rpms?

 

Let me clarify bone stock, the motor was open header with alaniz port matched IM with no filter and AEM EMS. The block itself was stock in aspect of cams and pistons.

 

This head is for boosted applications. I saw 4 rwhp running one na.

 

for this... I personally have this exact head and I must say the work is amazing! Whos next to join the Alaniz head club?

 

^ I agree, bump for a great seller!

 

DAMNNNN I wish i had the money sooo badd. bump for seller and a excellent head!

 

 

any issues with running this head and a 3mm inlinepro headgasket??