The Moddiction Titanium shift knobs are now back IN STOCK!!

We have the 2" Anvil Titanium as well as the brand new model the Anvil II in full Titanium

Many different colors/finishes are available!

To see on my site please follow this link.

http://shop.moddiction.com/Moddictio...t-Knob-018.htm


Available in either a 2" sphere or the "Anvil II" design in full Titanium.

2" Anvil Titanium weighs 255 grams

Anvil II Titanium weighs in at approximately 235 grams.

-Available in a Brushed Finish and Semi polished finish (For certain colors only)

-Available colors include: plain Titanium, Burnt Titanium, Iridescent Burnt Titanium, Gold, Pink/Purple, Iridescent Blue, Teal. *

Slight variations of those colors can be done. No red or black are available.

-Fully countersunk (1"+ lower than stock)

-Height adjustable as are all current Moddiction Shift Knobs. (For 10mm shifter lever size only)

-Made in the USA

-20mm opening in shift knob to accommodate many reverse lock-out shifters.


Here are some pictures I took today of most of the finishes I offer.






















These are the same 2" diameter as my current Anvil Shift Knobs. They are made from Titanium and offered in a Brushed and Polished finish. These weigh more than the other Titanium shift knobs currently available as these are 2" in size. Weigh just under 260 grams! OEM AP1 shift knob is 150 grams so you get the Titanium material, much lower height(1"+ lower than stock and great added weight(100 grams+)
Regular price of them is $99.99.
They will be available in plain Titanium finish(Brushed and most likely polished as well as a burnt finish. (Burnt finish will be $10 extra)

Shown here are the burnt finish shift knobs which are now available for order!





Here are the Brushed and semi polished Titanium pictures.

 

nice! i want one! lol

 

Damn dude, I might jump on this rather than the crinkle blue. Is it possible for more of a burned blue than what is pictured?

 

That blue pictured is lighter than they will be. I burned that one then sanded the burn off so anodizing didn't come out nearly as dark as it should.

 

Is it close to the J's knob?

 

I can anodize any color so I'm sure that can be done.

 

Alright kick ass. If you can do the royal blue similar to that crinkle blue we were discussing, then I'm all in for this one when you have them available.

 

I'll do them in a couple different blues to find the best look before releasing them.

 

Sounds good man. I'll be looking for them when you release them then.

 

Should have the shift knobs completed by next week. Will then just need to be anodized and then will be ready to order.