When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3.5" to 3" sounds like overkill to me. i know you have built a machine, but why bother with anything larger than 2.5"-3"? my guess, hp numbers will be higher way, way up top and tq will be low across the board.
Originally Posted by RadioZero,Sep 1 2006, 06:22 PM
3.5" to 3" sounds like overkill to me. i know you have built a machine, but why bother with anything larger than 2.5"-3"? my guess, hp numbers will be higher way, way up top and tq will be low across the board.
just my .02 worth, good luck!!
The headers will be larger so the exhaust needs to be larger. There are three mufflers in the system and yes it probably will be loud. We are trying to keep the noise down.
Me too. Things seem to be moving now. I'm going on vacation next week and will be back after that to do the testing hopefully. By the end of the year we may have the complete header back system done. I've been told much less but damn the project gets sidetracked easily. It will get done but I can't hold my breath that long.
Sideways Big Exhaust
I'm going on vacation next week and will be back after that to do the testing hopefully. 
By the end of the year we may have the complete header back system done. I've been told much less but damn the project gets sidetracked easily. It will get done but I can't hold my breath that long. 
![[AP2-2NV]'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%238c44db' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>[</text></svg>)