Anyone know of a place I can get an X-Brace installed on a Saturday anywhere in Southern California? I would do it myself but not sure I want to go out and buy jackstands and a torque wrench. Thanks.

 

division r

 

ask ur honda service dealer

 

x brace takes like 5 minutes to install. any shop shouldn't charge more than $15 for labor. Division R is a nice place... e-autosports is good also

 

Do it your self
2 ramps keep tires on ground. or your frame will flex and new bolts will not line up
4 large bolts, retorque them good

if you have no tools... call

Corner3
949.380.0801
in Lake Forset near 241

Steve and Nima good guys

 

Post in your local forum and I bet someone will live near you and will do it for a 6 pack. I would, but the drive up to Boise would be a pain in the rear this time of year in a S.

 

Where do I put the jack stands? Once I have the jack on there, there is no room for the stands. Do I put them somewhere else?

Also what size are bolts? I thought they were M10, but what is that in MM? I tried a 10mm and that is too small.

 

The stands can be placed on the sub frame on the car at both ends.

An M10 bolt takes a 14MM wrench.

 

Can anyone give me a clearer picture of exactly where to place the stands?

 

Just call, you could get hurt if you are not positive where to place juststands

did you buy it used , new kits come complete