S2000 Forced Induction S2000 Turbocharging and S2000 supercharging, for that extra kick.

My Full Race/T1 turbo setup *543whp/350tq*

Thread Tools
 
Old Feb 18, 2008 | 02:48 PM
  #1  
kutsujula's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,980
Likes: 0
Default My Full Race/T1 turbo setup *543whp/350tq*

I just got in my Full Race manifold friday! I'm about to start the install here in the next two week's, at the same time I'm going to install my clutch. The downpipe/dumptube is gonna be fabbed up by tony1@t1 race development in rowlett,tx. It'll be vband as my turbo is vband also. The turbo is a GT3076R with a .82 AR. It's going to be stock headgasket so stock compression. I've got a couple pic's of the stuff before I start to put it on. I've still got a few item's im waiting to come or order such as the koyo radiator, b r coolant line kit, catch can, etc. I'll take install pic's along the way of both clutch and turbo kit!
Full Race Manifold



T1 Vaccum Block

AEM Oil Pressure Gauge

Comp Clutch Stage 4


AEM EMS

Inline Pro Oil Relocation Kit

Precision Intercooler



Also sitting in closet:
Full-Race Oil Feed Line
Full-Race Oil Drain Line
Precision GT3076R
Precision 1000CC injectors
Tial 44MM Wastegate
Tial 50MM Blow Off Valve
AEM 3 Bar Map Sensor
AEM Serial Gauge
NGK Wideband
Prologger Boost Control Solenoid
HTG Air Pump Delete Block Off Plate
Walbro 255

Whats left
RC Injector Clips
Downpipe (T1 is fabbing it up)
Dumptube (T1 is fabbing it up)
Water line kit
Koyo Radiator
Heat Wrap
Double gauge pillar
Reply
Old Feb 18, 2008 | 03:06 PM
  #2  
Aze85's Avatar
Registered User
 
Joined: Jun 2004
Posts: 8,000
Likes: 0
From: No.VA
Default


are you gonna keep the stock head gasket? what you gonna do if you wanna increase boost
Reply
Old Feb 18, 2008 | 03:07 PM
  #3  
kutsujula's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,980
Likes: 0
Default

Yep stock head gasket.
Reply
Old Feb 18, 2008 | 03:47 PM
  #4  
PeanutButter's Avatar
Registered User
 
Joined: May 2007
Posts: 1,537
Likes: 0
Default

Guarantee you will have boost creep.

The manifold is to effiecent along with that turbo and exhaust to run low boost.
Reply
Old Feb 18, 2008 | 04:23 PM
  #5  
kutsujula's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,980
Likes: 0
Default

Originally Posted by PeanutButter,Feb 18 2008, 04:47 PM
Guarantee you will have boost creep.

The manifold is to effiecent along with that turbo and exhaust to run low boost.
I been told this boost creep issue has been fixed
Reply
Old Feb 18, 2008 | 04:26 PM
  #6  
blackey's Avatar
Gold Member (Premium)
 
Joined: May 2001
Posts: 920
Likes: 0
From: Vallejo
Default

peanutbutter...

Look what they did to the wastegate piping. There is now a really nice wide transition to the wastegate. They listened, and fixed it it appears. I bet it works perfectly now. Probably the best manifold on the market now.


Reply
Old Feb 18, 2008 | 05:52 PM
  #7  
kutsujula's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,980
Likes: 0
Default

I was told that they changed the design, im not sure what they changed exactly, tony told me but i really couldnt rexplain it. Tony is on the forum's ill see if I can get him to explain it a little better.
Reply

Trending Topics

Old Feb 18, 2008 | 06:50 PM
  #8  
PeanutButter's Avatar
Registered User
 
Joined: May 2007
Posts: 1,537
Likes: 0
Default

yeah i see the difference now, should help, but low boost, under 10 psi will probably still creep.

GL though.
Reply
Old Feb 18, 2008 | 08:49 PM
  #9  
BlownAP's Avatar
Registered User
 
Joined: Mar 2006
Posts: 3,615
Likes: 0
From: 951
Default

GL, Im jealous I cant wait to go Full race.
Reply
Old Feb 19, 2008 | 04:20 AM
  #10  
kutsujula's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,980
Likes: 0
Default

thanks guys!
Reply



All times are GMT -8. The time now is 06:43 PM.