On this project, along with the customer, we decided it was time to get creative and do something a little different in terms of S2000 forced induction. The manifold is all hand made and laid out so that runners 1 and 4 spool one turbo as 2 and 3 spool the other. Two Garrett GT28RS turbos utilizing .63 a/r t3 housings were used along with two Tial 38mm wastegates. The air feeds through 2.5" polished aluminum piping that attatches to a custom V-mount intercooler and blows off using a Tial 50mm unit. The exhaust is sent through dual stainless steel 2.5" downpipes to full 2.5" cutom stainless steel exhaust finally exiting out Burns mufflers. Precision 880cc injectors and a 3 bar map sensor were paired with AEM EMS to take care of the air/fuel levels. Finally the car was sent off to Evans Tuning where the car was dyno tuned producing 475whp and 320wtq at 15psi and on 93 octane gas. At this point the kit has much more potential but the customer only wanted this much power for now. Here is the link to the tuners site with more info on that: http://forums.evans-tuning.com/viewt...hp?f=29&t=5532

 

thats incredible!! i can't believe there was enough room to squeeze that all in there!!!!! great #'s!!!! i wanna see this in person lol

 

sexxxxxxxx

 

cool.. never seen a TT on a 4 cylinder.
what is the HP potential of a system like this?

 

congratulations!! Very impressive with both the final product and the numbers she is producing!

How is the spool up with it being 2 cylinders a turbo? Shouldn't affect it too much I am guessing??

 

Wow thats a beautiful setup. The V mount is amazing as well. Total SEX

 

Very cool

 

cool to see it pulled off. I know twin setups are almost never as good as a single but it is nice to see someone think outside the box a little and get creative.

I have seen nicer twin turbo setups on a 4cylinder though. Mainly this one. I think it just looks nicer b/c the twin turbos look a little more at home in the silvia than in the s2k.

 

This set up looks sick. Any pictures of the manifold itself? Any internal motor work?

Martin

 

woo hoo, finally some pics. I've been waiting to see them since i saw the numbers posted on evan's website. Could you fit a set of gt3071 or 76's on? or are they too large?