VORTECH V3 Si Supercharger Custom kit (everything is practically new, only installed recently) This is a custom setup that you can’t buy and was created from gathering research and experience in the industry and veteran forum members. Each part was purchased seperately. All receipts date within the last 8 months and installed 3 months ago with very few drives. Everyone from GRIPWERKS/SFV- TOPDOWN, Etc. and many people on this forum can vouch how short of a period of time I had this setup. Sadly I hardly even take out my car. When I started this project I was shooting for a minimal goal, and I didn't plan on selling it. But a new financial need is in my life and needs current attention for me to stay true to my Long term goals. Everything is still on the car, and will be removed once a deal has been set and I will provide everything as stated including some extras. Visits are welcome to inspect everything before purchase, I can attest everything I am selling is in WORKING Condition, and again please fee free to make some offers, but lowballing will be denied. I know how much I spent and I am selling all of this for 50% less then what I invested. VORTECH Has inspected and checked the Unit.


-Polished VORTECH V3 S/C Si Trim 1150CFM good for 775HP at 17 PSI. Self-lubricating unit which means no need to tap in to oil pan. (Comes with 2 extra bottles of Supercharger fluid)
-Polished VORTECH Water to Air Intercooler.
-Black anodized VORTECH front mount for cooling system.
-Black VORTECH Water to Air Pump for Intercooler.
-ASP 3.8 S/C Aluminum Pulley. (Currently on)
-VORTECH 4.10 S/C Pulley. (Brand New)
-Custom BURNS-Sideways Aluminum Intake Elbow.
-AEM Dryflow Filter (Grey)
-AEM 3.5 Map Bar Sensor 0-60psi
-NGK BKR8EIX iridium spark plugs. (2-Sets)
-High-Temp Black silicone hoses. (Original VORTECH Blue will be yours also.)
-HOSE TECHNIQUES T-bolt Clamps. (Original VORTECH Screw Clamps will be yours also.)
-COMPTECH 4-1 Long Header.
-GREDDY Oil Pressure Guage with Sandwich Adapter.
-CUSCO Oil Catch Can.
-GATORBACK Belt
-Original Intake Box and Filter including other Original Parts that came with it but not installed will all be yours also.
-All bolts, nuts, screws that come with the kit are upgraded to higher grade.
Comes complete with all brackets, hoses and everything for install.

$5250.00 obo
-AEM 1052 EMS VERSION-2 aka V2 or GEN-2 (The newest and BEST includes locking capability.)
-RC 1000cc Injectors with HPI Injector Driver

$1000.00 obo

Buy everything above this ^^^ for $6000.00 FIRM!!!! (Pure Bolt-On and ready to drive for 2000-2005 S2000's)








-AEM Serial Guage. (BNIB)

$175.00 obo

-AEM Oil Pressure Guage. (BNIB)

$175.00 obo



-SPARCO Steering Wheel with Hub

$165.00 obo


EVERTHING BELOW THIS IS ONLY READY TO BE SOLD ONCE I SELL THE SUPERCHARGER KIT.. 07/02/2010

The items below I am currently debating but please PM or call if you have interest since I might just let them go. For those wanting anything below will have to wait till I sell the SuperCharger Kit first. Because I need to just in case drive the car or have it towed for any reason for other removal.
-AEM 1052 EMS VERSION-2 aka V2 or GEN-2 (The newest and BEST includes locking capability.)
-RC 1000cc Injectors with HPI Injector Driver

$1000.00 obo


-VEILSIDE Teardrop FULL Titanium Exhaust. 4lbs!! (If you don't know this exhaust then don't lowball.)

$600.00 obo

-TEIN FLEX Coilovers

SOLD

Thank you...

Rom- 818-266-6257

 

For reals this time

 

yea Mike.... Lol....

 

Damn I wish I had money...GLWS bro!

 

600 for a VEILSIDE Teardrop FULL Titanium Exhaust?

This will be gone in 3...2...1

 

5.00 at the SD bbq says you're car won't be parted..

 

^^^not if I can have my wave =)

but if not bump for the homie

 

Wow $500 for Tein Flex!!!! Bump for a homie.

 

for the homie

 

Your getting me a BBQ plate if I do...