The ASM Lounge
Joined: Aug 2005
Posts: 431
Likes: 7
From: Trabuco canyon, Calif
Can't ball on a budget but the taste is very refined.
Looks great for a used piece. I priced through Jesse and it's pretty cheap now to get some of these ASM parts.
What are you worried about cost for?
Baller
[/quote]
Ballin on a budget!
[/quote]
Originally Posted by sillyboybmxer' timestamp='1456283733' post='23889290
[quote name='WhyW' timestamp='1456269804' post='23889115']
[quote name='sillyboybmxer' timestamp='1455998468' post='23886095']
I found it used.
[quote name='sillyboybmxer' timestamp='1455998468' post='23886095']
I found it used.
Baller
[/quote]
Ballin on a budget!
[/quote]
Registered User
Joined: May 2014
Posts: 100
Likes: 5
From: Bowling Green, KY
Hey guys I'm picking up a used ASM rear wide bumper soon and I'm a little confused at exactly how the sides are installed or how they attach to the car. I have heard you just remove the oem bracket but how you you attach the bumper without that?
Registered User
Joined: May 2014
Posts: 100
Likes: 5
From: Bowling Green, KY
Ok that sounds right. I haven't found much info on how to install it but probably be pretty easy once I have everything in front of me, thanks!
Registered User
Joined: Feb 2010
Posts: 612
Likes: 3
What do you guys think?
In case the posted images dont post, attached them as well
Bits from their blog:
"There was a theory that to make that high pitch screaming sound, It has to be a single, It has to be titanium but the basic layout is the Same as the silencer kit2 so the sound is almost the same. The first two lot has been sold, the next two will arrive end of May."
Very rough google translation from the earliest post:
"Design direction of the ISDesign silencer kit Titan has been decided.
From the user's for the two of the tail design, it is a voice say, "(especially against AP1-130 type later genuine bumper) sense of volume is not enough," there are many. Of course, but we also consider thick tail finisher aware of the market, it will be the status quo design because the sound quality is greater now measuring volume is low, for the finisher position (length when viewed from the side), two types of genuine we decided to take into account the balance between the bumper.
Titan model will change the design. It does not the thick tail finisher. Blue burnt color oxygen with plenty is no preference. Finisher position ASM ISDesign rear aero bumper 04 to adjust to. In titanium muffler similar processing of super bike when viewed from the side, and then to design which is directly connected to the lightweight image. ASM plate also changes to the simple laser engraved. Because products that are likely to be around 50 million and was to be devoted to "get to buy the person who has understood commitment and preference only" ASM seems to making things.
"
In case the posted images dont post, attached them as well
Bits from their blog:
"There was a theory that to make that high pitch screaming sound, It has to be a single, It has to be titanium but the basic layout is the Same as the silencer kit2 so the sound is almost the same. The first two lot has been sold, the next two will arrive end of May."
Very rough google translation from the earliest post:
"Design direction of the ISDesign silencer kit Titan has been decided.
From the user's for the two of the tail design, it is a voice say, "(especially against AP1-130 type later genuine bumper) sense of volume is not enough," there are many. Of course, but we also consider thick tail finisher aware of the market, it will be the status quo design because the sound quality is greater now measuring volume is low, for the finisher position (length when viewed from the side), two types of genuine we decided to take into account the balance between the bumper.
Titan model will change the design. It does not the thick tail finisher. Blue burnt color oxygen with plenty is no preference. Finisher position ASM ISDesign rear aero bumper 04 to adjust to. In titanium muffler similar processing of super bike when viewed from the side, and then to design which is directly connected to the lightweight image. ASM plate also changes to the simple laser engraved. Because products that are likely to be around 50 million and was to be devoted to "get to buy the person who has understood commitment and preference only" ASM seems to making things.
"
Joined: Dec 2006
Posts: 9,744
Likes: 31
From: Nevada
Joined: Dec 2006
Posts: 9,744
Likes: 31
From: Nevada
And searching for sounds i found this video of the much cheaper, $4000 system which i like.
https://youtu.be/ulCuEYmDU6Q
https://youtu.be/ulCuEYmDU6Q