PTUNING: Reintroduction as a Vendor (56K beware)
Thread Starter
Former Sponsor
Joined: Aug 2007
Posts: 617
Likes: 5
From: Northern VA
PTUNING: Reintroduction as a Vendor (56K beware)
We would like to take this opportunity to introduce our company PTUNING as an official vendor on this forum. Many of you know us as the VA sponsor for the Capital Driving Club's autox events. We've also met many of the members that have come to us for custom 4-wheel alignments and dyno tuning.
A little bit about our company:
We've been in the performance parts business since 1998. In 2004, we decided to expand into the servicing and installation aspect of the performance parts industry. After 2 years of permits, design, and construction, we finally completed the construction of what we believe is a one-of-a-kind tuner-shop facility in North America.
Our facility offers the following services:
-4-wheel 3D imaging alignment with inground-lift to accomodate lowered vehicles. If you're looking to get your alignment back to spec, or if you're looking for a UK-spec alignment, or even if you want a custom-alignment for autox or roadracing, we have the equipment and know-how to make it happen.
-Touch-less robotic tire mounting and tire balancing with sonar radial runout. If you just bought a set of expensive volk wheels and you don't want to risk getting it scratch by taking it to your local garage, we have the proper equipment to mount and balance wheels/tires without leaving a single scratch. Our tire changer is also the official tire changer for all Ferrari dealerships.
-Custom Dynocell-enclosed AWD dyno tuning. We spared no expense to have Dyno Dynamics build us a 2400WHP Steady State, quad-retarder AWD loading- dynanometer. This dyno is a a one of a kind setup in North America. In addition to the dyno, we had a custom sound-abatement dynocell built to our spec. The dynocell is equip with two 500lbs radial exhaust fans, generating over 65,000cfm of air flow. The fans not only extract heat and exhaust from the vehicle on the dyno, but it also constantly draws fresh air from the outside into the dynocell. This means that your car will be in the same state of tune when it leaves our facility as it did on our dyno.
-Full servicing and installation of all aftermarket performance products. We specialize in turbo and supercharger installation and tuning as well as suspension upgrades and alignment.
-Minor fabrication including TIG & MIG welding
-Nitrous Refill
-Nitrogen tire inflation (Coming Soon)
-Corner balancing (Coming Soon)
-CO2 Refill (Coming Soon)
-and much more...
And, of course, we're also a fully-stocked warehouse distributor for most of the brands we carry. Our new facility the heart of Old Town Manassas, VA at:
PTUNING.COM
9432 Center Point Lane
Manassas, VA 20110
P: 703.257.1728
F: 703.257.7619
We look forward to serving the S2000 community. Below are some pictures of our new facility.
MrC
A little bit about our company:
We've been in the performance parts business since 1998. In 2004, we decided to expand into the servicing and installation aspect of the performance parts industry. After 2 years of permits, design, and construction, we finally completed the construction of what we believe is a one-of-a-kind tuner-shop facility in North America.
Our facility offers the following services:
-4-wheel 3D imaging alignment with inground-lift to accomodate lowered vehicles. If you're looking to get your alignment back to spec, or if you're looking for a UK-spec alignment, or even if you want a custom-alignment for autox or roadracing, we have the equipment and know-how to make it happen.
-Touch-less robotic tire mounting and tire balancing with sonar radial runout. If you just bought a set of expensive volk wheels and you don't want to risk getting it scratch by taking it to your local garage, we have the proper equipment to mount and balance wheels/tires without leaving a single scratch. Our tire changer is also the official tire changer for all Ferrari dealerships.
-Custom Dynocell-enclosed AWD dyno tuning. We spared no expense to have Dyno Dynamics build us a 2400WHP Steady State, quad-retarder AWD loading- dynanometer. This dyno is a a one of a kind setup in North America. In addition to the dyno, we had a custom sound-abatement dynocell built to our spec. The dynocell is equip with two 500lbs radial exhaust fans, generating over 65,000cfm of air flow. The fans not only extract heat and exhaust from the vehicle on the dyno, but it also constantly draws fresh air from the outside into the dynocell. This means that your car will be in the same state of tune when it leaves our facility as it did on our dyno.
-Full servicing and installation of all aftermarket performance products. We specialize in turbo and supercharger installation and tuning as well as suspension upgrades and alignment.
-Minor fabrication including TIG & MIG welding
-Nitrous Refill
-Nitrogen tire inflation (Coming Soon)
-Corner balancing (Coming Soon)
-CO2 Refill (Coming Soon)
-and much more...
And, of course, we're also a fully-stocked warehouse distributor for most of the brands we carry. Our new facility the heart of Old Town Manassas, VA at:
PTUNING.COM
9432 Center Point Lane
Manassas, VA 20110
P: 703.257.1728
F: 703.257.7619
We look forward to serving the S2000 community. Below are some pictures of our new facility.
MrC
Trending Topics
Registered User
Joined: Jun 2005
Posts: 11,917
Likes: 0
From: H-Town
such a great resource to this community. PTUNING is an outstanding shop. Take a visit there if you haven't already its stunning in person! And not to mention that beast of an S2K the Toan drives 
I'll be calling you guys for a tire quote... once I figure out what I want. 
