used comptech supercharger
Joined: Jun 2010
Posts: 1,019
Likes: 8
From: Baltimore, MD
Originally Posted by TepEvan' timestamp='1320938239' post='21145142
[quote name='9000revolutions' timestamp='1320795273' post='21140027']
My kit will come with a 15lb boost pulley along with the 8lb. I'm getting 333 to the wheels at 7700rpm. I'm still running on a stock map sensor which doesn't recognize boost so it cuts fuel at 8k. With a new map and retune you should see around 360-380 to the wheels.
My kit will come with a 15lb boost pulley along with the 8lb. I'm getting 333 to the wheels at 7700rpm. I'm still running on a stock map sensor which doesn't recognize boost so it cuts fuel at 8k. With a new map and retune you should see around 360-380 to the wheels.
[/quote]
I know, because me and the mad scientist don't have time to tear open the engine block and replace the piston rings he may have fried. Plus I think the mad scientist pissed off the wrong machine-gun wielding punk.
Thread Starter
Registered User
Joined: Nov 2007
Posts: 1,986
Likes: 0
From: Bel Air, MD
The kit is a higher mileage kit and definatly need a rebuild. The kit will include a complete stock kit minus the fuel regulator. AEM ems. 15lb boost pulley and pulley belt. 660cc injectors. 8 NGK spark plugs. And a VAFC controller and AEM air/fuel ratio gauge.
Thread Starter
Registered User
Joined: Nov 2007
Posts: 1,986
Likes: 0
From: Bel Air, MD
Thank you everyone that has sent me PMs about wanting to buy my SC. I like the interest you have but this thread was not intended as a FS thread. Please be patient and keep checking the swap meet for my soon to come FS thread.
Registered User
Joined: Oct 2011
Posts: 2
Likes: 0
I know this would be better posted in the FI section, But I wanted to know the Mid A's opinion. I'm probably going to part out my S and return it to stock. I wanted to know what the going rate for a very used comptech supercharger with aftercooler kit goes for. This would help me with an asking price. Look for my FS thread to soon come aswell and thanks for the help.