Name: Mike
Car: (MY08 BB w/ red interior and Volk SF Challenges at several cruises/meets this year)
Location: Southern Baltimore / Columbia areas
Means of Contact: PM


-------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------
ALL ITEMS ARE GONE. Thanks to all and enjoy your new items.
-------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------
I'm prep'ing a few other things for sale in the next week or two.
-------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------

Description: Full set of OEM Bridgestone Potenza RE050
(2) Front: 215/45ZR17
(2) Rear: 245/40ZR17
Price: SOLD
More info:
These tires were removed a few months after I purchase the car. I put Continental ExtremeContact DWS on my AP2v3's and then replaced them with 18" Volks. I couldn't find my depth gauge so I found an excuse to order an awesome one and it was delivered today. I took two measurements per tire; here they are with pics:

Here are the new specs from tirerack.com


Tread depths

215/45ZR17
Front 0.2595 0.2590 0.2590 0.2590
0.2590 * 32 = 8.288
8.288/32"
New are 9/32"
92.1% tread left on front


245/40ZR17
Rear 0.2670 0.2665 0.2665 0.2665
0.2665 * 32 = 8.528
8.528/32"
New are 10/32"
85.28% tread left on rear

A new set runs $885 shipped to MD from TireRack. I'm asking 56% of the new price for 92% and 85% of the life of new tires.

No shipping. Tires are just off 95 in southern Baltimore.



No cheating... zero'ed



Front






Rear





--------------------------------------------------------------------

Description: Moddiction Anvil Textured satin black Shift knob.
Price: SOLD
Info: Moddiction's post about the knobs here and here. The knob is in good condition except where the supplied nut rubbed a little of the finish off. The chips are not visible when installed. Also comes with the original Moddiction nut for installation.







Not interested in shipping right now. Cash only.

--------------------------------------------------------------------

Description: K&N 63-3514 Air Charger Air Intake Kit
Price: SOLD
More info:
This is model 63-3514. Just removed it from a MY08. Kit was on the car for about 5000 miles. Includes all the original hardware (no instructions but can be found online). Zero issues; just too loud for me. Since this was on MY08 the tube has a hole drilled and grommet mounted for the temperature sensor. All parts are accounted for and are in very good condition. I'll include a wrench that I bought to help with installation.

Pic of where I installed the grommet from the kit.



Other pics of condition. (Loose bolts are held in place by little white zip ties.)

 

Updated price.

 

hey mike, do you have any pictures of this knob installed on your car? I just want to see how low it sits Thanks!

 

I'm not a big picture guy but I found one in Moddication's ordering thread. It looked like this. It sits flush with the shift boot which is much lower than stock.

https://www.s2ki.com/s2000/topic/751...t__p__17961567

You can look through his entire post over here https://www.s2ki.com/s2000/topic/751...ft-knobs-1-lb/

 

Two pending offers on Moddiction knob

 

PM You.

 

If you have this is a few weeks I'll be making a trip to Maryland to trade with a member penguinsintuxedos.hope I spelled it right. And want the k&n mainly for the heat shield.can you post pictures of the hole since I have a MY00 and would be welding it shut.also what is the pipes inner diameter

 

The intake tube is plastic. Here is a pic from their website I'm pretty sure the picture has one too many hose attachment points; the one on the inside of the bend is correct but the outside one on the bend is not there. That's where K&N tells you to drill a hole and insert a grommet in the kit so MY06+ can insert the temp sensor.

I'll run over to the storage unit today or tomorrow and get some pics up.





Moddiction knob is sold.

 

Oh that will be easier to fix with fiberglass I think.but yea a diameter on the tube is a main interest as well.thanks man!

 

pics added