Tech Meet This Weekend July 21st
It appears that the New England S2000 owners need something to do this weekend
and Glenn has proposed that we have another tech event on Saturday to finish some fluid swap outs. Sorry for the late notice and we are playing it by ear but it looks like 9:30 on Saturday Morning probably running through lunch. I will bring an extra hose so that we can do a car wash at my shop.
I tried adding this to the MSN calander but it timed out server busy.
Directions below, drive around to the back of the building!
The company name on the door is M.J. Bradley & Associates and is located at 8030 South Willow Street, Building 2, Unit 7 in Manchester, NH 03103. This location is south of the Mall of NH near the east end of the Manchester Airport east-west runway. This location is accessible from either exit 5 off of I93 or exit 1 from I293 (Mall of NH exit).
I93N from Massachusetts
Rt. 93North from Massachusetts to Exit 5 (Londonderry) and take a left at the bottom of the ramp towards Manchester. Follow this road for about 5 miles. You will come to a fork in the road at The Yard Restaurant (stay to the left) as this becomes South Willow Street. Approximately 1 more mile on the right is the 8030 South Willow Street Complex (big sign for New England Duplicator). If you come to a stop light at the Triangle Mall Complex you have gone too far. After turning right and entering the complex take your next left and proceed between buildings 2 and 3. MJB&A is in Unit 7 in Building 2 on the left.
If you miss exit 5 just keep going to I293 west (left at fork), take exit 1 for the Mall of NH, take left at the top of the ramp and follow the directions below.
Everett Turnpike (RT3) N from Massachusetts
From Rt. 3N in Massachusetts continue into NH. This highway becomes the Everett turnpike, stay on the highway and don
and Glenn has proposed that we have another tech event on Saturday to finish some fluid swap outs. Sorry for the late notice and we are playing it by ear but it looks like 9:30 on Saturday Morning probably running through lunch. I will bring an extra hose so that we can do a car wash at my shop. I tried adding this to the MSN calander but it timed out server busy.
Directions below, drive around to the back of the building!
The company name on the door is M.J. Bradley & Associates and is located at 8030 South Willow Street, Building 2, Unit 7 in Manchester, NH 03103. This location is south of the Mall of NH near the east end of the Manchester Airport east-west runway. This location is accessible from either exit 5 off of I93 or exit 1 from I293 (Mall of NH exit).
I93N from Massachusetts
Rt. 93North from Massachusetts to Exit 5 (Londonderry) and take a left at the bottom of the ramp towards Manchester. Follow this road for about 5 miles. You will come to a fork in the road at The Yard Restaurant (stay to the left) as this becomes South Willow Street. Approximately 1 more mile on the right is the 8030 South Willow Street Complex (big sign for New England Duplicator). If you come to a stop light at the Triangle Mall Complex you have gone too far. After turning right and entering the complex take your next left and proceed between buildings 2 and 3. MJB&A is in Unit 7 in Building 2 on the left.
If you miss exit 5 just keep going to I293 west (left at fork), take exit 1 for the Mall of NH, take left at the top of the ramp and follow the directions below.
Everett Turnpike (RT3) N from Massachusetts
From Rt. 3N in Massachusetts continue into NH. This highway becomes the Everett turnpike, stay on the highway and don
Tom,
I deleted my other post after having read this one....Tech day sounds like a great plan for the day! And, for anyone who wants to go for a drive after the tech session, we can discuss plans at the meet.
I deleted my other post after having read this one....Tech day sounds like a great plan for the day! And, for anyone who wants to go for a drive after the tech session, we can discuss plans at the meet.
Damn Tom!
You beat me to it!!!
I was typing up this post
Oh well
here's my write up anyway
________________________________________
NH TECH DAY #2
This Saturday. Tom has graciously offered the use of his garage and lift again for another Tech Day. For those that went to his first one, earlier this year. Ben and I were the only ones to work on our cars, but quite a few showed up!
Tom and I plan on changing our Tranny fluid with Redline MTL-90. Yes, some of you remember I did change my Tranny fluid at the first NH Tech Day. But after Sunday's Auto-x, I have noticed a major difference with my gear box. And researching more, I have a feeling it is due to the type of Redline Fluid I did use. I used MT-90 instead of MTL-90. Although it is split on this web site on which to use
You beat me to it!!!
I was typing up this post
Oh well
here's my write up anyway
________________________________________
NH TECH DAY #2
This Saturday. Tom has graciously offered the use of his garage and lift again for another Tech Day. For those that went to his first one, earlier this year. Ben and I were the only ones to work on our cars, but quite a few showed up!
Tom and I plan on changing our Tranny fluid with Redline MTL-90. Yes, some of you remember I did change my Tranny fluid at the first NH Tech Day. But after Sunday's Auto-x, I have noticed a major difference with my gear box. And researching more, I have a feeling it is due to the type of Redline Fluid I did use. I used MT-90 instead of MTL-90. Although it is split on this web site on which to use
Derrick,
Now you have no excuse to stay in NY this weekend!
Glenn,
If Derrick can escape from NY, how about we meet you at your place for the drive up...around 8:20? Which means Derrick will have to be at my place at 8:00.
Now you have no excuse to stay in NY this weekend!
Glenn,
If Derrick can escape from NY, how about we meet you at your place for the drive up...around 8:20? Which means Derrick will have to be at my place at 8:00.




