Upstate Chat 2019 - 2020
#292
Registered User
#297
Honestly, it was a pretty strange feeling, being locked into the seat SO securely. I couldn't even reach the rear view mirror to make adjustments. Definitely lower than the stock/BYS seating positions as well.
Wednesday might be the first commute of the season, then back up on jack stands to finish the passenger side seat.
#299
Community Organizer
#300
Re Post #288
On the shoulder bolts for the three point seat belts for the Volvo. I used a flange washer, then extended the flange with two SAE washers, then I added a piece that I made out of those connectors for threaded rod. The connector is hex shaped, threaded and is about an inch long. I placed it in my drill and then ran it up against the grinding wheel to flatten out all of the corners. Then cut it down to about a third of an inch with a dremmel tool. Glommed on the JB Weld and screwed down the threaded piece. Then some paint.
On the shoulder bolts for the three point seat belts for the Volvo. I used a flange washer, then extended the flange with two SAE washers, then I added a piece that I made out of those connectors for threaded rod. The connector is hex shaped, threaded and is about an inch long. I placed it in my drill and then ran it up against the grinding wheel to flatten out all of the corners. Then cut it down to about a third of an inch with a dremmel tool. Glommed on the JB Weld and screwed down the threaded piece. Then some paint.