The quest for "Flushness" using AP2 OEM Wheels!
Joined: May 2008
Posts: 716
Likes: 0
From: Orange County
im planning to get Option select ebay spacers 20mm front and 25mm rear
my fenders are already rolled and i cant wait to put them on.
anyone pay less than 80$ shipped for a pair of 20/25mm spacers?
will post pics when this is all done.
my fenders are already rolled and i cant wait to put them on.
anyone pay less than 80$ shipped for a pair of 20/25mm spacers?
will post pics when this is all done.
Registered User
Joined: Oct 2006
Posts: 1,347
Likes: 2
From: Woodstock, GA
Niptek
I really recommend getting spacers in the rear with integrated studs.... Otherwise you'll have to remove the rear hubs to install extended studs and that is a pain in the ass....
For something like spacers where you may want to take them off etc... depending on your wheels so the integrated studs is the way to go... 5 minute install( integrated) vs. 4 hours or 200 @ a shop to get extended studs installed.
The link you posted I didn't see integrated studs on your list. Maybe I saw wrong.
I really recommend getting spacers in the rear with integrated studs.... Otherwise you'll have to remove the rear hubs to install extended studs and that is a pain in the ass....
For something like spacers where you may want to take them off etc... depending on your wheels so the integrated studs is the way to go... 5 minute install( integrated) vs. 4 hours or 200 @ a shop to get extended studs installed.
The link you posted I didn't see integrated studs on your list. Maybe I saw wrong.
Joined: May 2008
Posts: 2,791
Likes: 2
From: dfw
http://adaptitusa.com/ - $80 a pair give or take a few bucks.
anyone else contact them to see if they will make 15mm spacers? the smallest spacer they make is 25mm currently.
I got on their online chat and i might as well have been talking to a robot because when i asked about 15 or 20mm spacers they gave me a canned response about stud clearance even after i said "look, my wheels have enough clearance, can you make a thinner set?"
maybe if we get some more inquiries over there they will make some thinner ones?
anyone else contact them to see if they will make 15mm spacers? the smallest spacer they make is 25mm currently.
I got on their online chat and i might as well have been talking to a robot because when i asked about 15 or 20mm spacers they gave me a canned response about stud clearance even after i said "look, my wheels have enough clearance, can you make a thinner set?"
maybe if we get some more inquiries over there they will make some thinner ones?
Joined: Jul 2008
Posts: 7,957
Likes: 43
From: Troy, NY
Originally Posted by 07RioS2k,Oct 25 2010, 09:43 AM
I really recommend getting spacers in the rear with integrated studs.... Otherwise you'll have to remove the rear hubs to install extended studs and that is a pain in the ass....
Registered User
Joined: Sep 2008
Posts: 2,419
Likes: 0
From: Canoga Park/ Northridge CA
[QUOTE=gabster,Oct 20 2010, 05:03 AM] You happen to have a pic how that ends up looking? (fender)
man i can't make up my mind now...
20f 25r ,
20 all around,
15f 20r
also does anybody have a picture of the fender and bumper tab mods that needs to be done? just to see what kind of work needs to be done
thanks
man i can't make up my mind now...
20f 25r ,
20 all around,
15f 20r
also does anybody have a picture of the fender and bumper tab mods that needs to be done? just to see what kind of work needs to be done
thanks
Joined: Feb 2009
Posts: 1,880
Likes: 7
From: 91101
^^ looking good. as for the guy above ss04, not so much...
im running 25s all around and im driving in la...
fenders rolled etc, the usual.
stock tire sizes as well, im curious how you managed to do that kinda damage....my fenders are fine...
im running 25s all around and im driving in la...
fenders rolled etc, the usual.
stock tire sizes as well, im curious how you managed to do that kinda damage....my fenders are fine...
Registered User
Joined: Nov 2008
Posts: 1,381
Likes: 0
From: SoCal.San Clemente<3
Originally Posted by s2kep3,Oct 20 2010, 08:15 AM
This thread is pointless...... Why waste money on extended studs, & spacers for oem wheels. Also waisting the time to roll fenders, f**k up fenders and risking the quarter panels to buckle..It's not oem, it's not jdm, it looks good but why do it???? Just buy a good set of wheels and make the car look better instead of wasting effort on oem wheels...... It's not a civic or integra people....
They should rename this thread "poormans s2000"
They should rename this thread "poormans s2000"
Registered User
Joined: Nov 2008
Posts: 1,381
Likes: 0
From: SoCal.San Clemente<3
Originally Posted by ss04,Oct 25 2010, 11:00 PM
^ Yikes!
I'm now sitting on 20mm all around. Bumped the fronts out 5mm more
http://www.nvsrides.com/Fall2010/Fall2010Web-12.jpg
I'm now sitting on 20mm all around. Bumped the fronts out 5mm more
http://www.nvsrides.com/Fall2010/Fall2010Web-12.jpg