Thread reserved for "Mugenized" S2000
Originally Posted by ap2 jared,May 9 2006, 12:04 AM
ok here we go..the long awaited NSX spec MUGEN MF10's (champ white)
16x8 frnt
17x9 rear
+42 offset
16x8 frnt
17x9 rear
+42 offset
Just more info to put in my personal rime/tire database.
From the last picture kind looks like a TOYO T1S in the rear

first of all thanks for the kind compliments.
i am running YOKO ES100'S
225/50/16 frnt
245/40/17 rear
the rear fenders have been trimmed slightly..and the frnts are stock.
im running a -2 degree camber in the rear to prevent any rubbing. but i am rubbing in the frnt badly on bumps. im on my way to an alignment shop today to negavtive camber the frnt...cross your fingers hope it works so i can slamm the car more. ill keep you guys updated.
Originally Posted by deppenma,May 9 2006, 08:09 AM
I was more intrested in teh front setup but the rear info is good to know as well
Let us know how thing go when you get the new front camber.
Let us know how thing go when you get the new front camber.
i decided to run -1.5 degree camber in the frnt
and -2.5 degree camber in the rear. so far soo good. i did hit a hard bump on the way home and it rubbed. i doubt ill lower the car anymore than how it sits in the pictures. i dont want to regret pulling a fender out by accident.
thanks for the kind compliments....
-jared







Freaking beautiful!