Alignment/ Camber front to rear??

Reply Subscribe

Thread Tools

Aug 9, 2020 | 07:50 PM

Shadow993

Thread Starter

Registered User

Joined: Oct 2019

Posts: 39

Likes: 0

Alignment/ Camber front to rear??

I just added front SPC camber ball joints in the front and rear toe control.

I'm dropped with standard KWV3 recommended setting and height.

My current alignment is spot on track alignment (pic attached) but less rear toe.

What should I set the front camber?? It's a dedicated track car, but I drive it to the track.

Last edited by Shadow993; Aug 9, 2020 at 08:03 PM.

Aug 10, 2020 | 04:30 AM

B serious

Joined: Nov 2007

Posts: 8,842

Likes: 1,700

From: Illnoise. WAY downtown, jerky.

Set it to whatever value works for you.

I'm using -3.5 deg up front.

Aug 10, 2020 | 09:06 AM

ZDan

Joined: Feb 2007

Posts: 6,863

Likes: 125

From: Pawtucket, RI

I'm running -3.3 front on my daily-driver/time-trials BRZ. I'd want at least -3 on street/track S2k...

Aug 10, 2020 | 09:20 AM

Bullwings

Joined: Aug 2010

Posts: 5,076

Likes: 834

What those guys above said - anywhere from -3.o to -3.5

Also, those TOE-IN specs for the rear are high for my liking. I'm AP2 and run 1/16" TOE-in on each side.