mts mode on Viper remote start issue
Installed viper 5706 alarm/remote start today everything went well except im having trouble with the remote start function. Automatic transmission mode works no problem. On manual transmission i go through the steps to enable mts (manual transmission mode).
1. With the engine running, press the foot brake then set the parking brake and leave the engine running. 2 open the driver door. 3. Release the foot brake. 4. press any command button on the remote, 5. The parking lights flash five times to confirm MTS mode en- able and the remote says remote start enabled 6. remove key from the ignition 7. close all doors 8. press the arm/lock button on the remote to shutdown the car. Immediately after the car shutsdown the remote beeps and says remote start error. when i disarm the car and open the door the lights flash 7 times telling me that there was a manaul mode error my first idea is the wiring guide in the manual says door trigger + and - and required for mts. i didnt connect the door trigger + to anything since there is no + door trigger. any help would be much apreciated. thanks |
All times are GMT -8. The time now is 02:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands