https://www.youtube.com/watch?v=-bH9hKYW_b4

any questions feels free tot ask

 

Embed in your post, bud! Also, great job


http://www.youtube.com/watch?v=-bH9hKYW_b4

 

thx lol

 

I cant seem to do this, do you have a step By step leo? Thanks

 

Great job! It looks really clean. I have a Nexus 7 with the JDM navi bezel but hesitant to cut the dash, I trimmed the back of the bezel and got the Nexus to fit perfectly. How hard was it to shape the bezel to fit? Is it warped at all? What did you use to mount the bezel to the dash? What kernel are you using on the Nexus?

 

I will go n take some more photos in a bout a few days.
N will also do some otg function testings.

I use elementalx kernel.
I am looking forward to tim paid kernel, that thing cost 30 euros...damn

 

To shape the bezel wasn't that hard.
I found it easier to heat n shape after the dash cutted.
U can simply push the dash in to thw hole, than start the heat the bezel slowly, starting from the midde n slowly move to the side n after the bezel heated up, n will slowly shape by itself.

 

To shape the bezel wasn't that hard.
I found it easier to heat n shape after the dash cutted.
U can simply push the bezel in to thw hole, than start the heat the bezel slowly, starting from the midde n slowly move to the side n after the bezel heated up, n will slowly shape by itself.

 

Some step by step instructions or installation/fabrication would be good for other wanting to attempt this mod. Can the LCD be use to download race gauge software for the track? Great job BTW. Looks fantastic.

 

Yes there is an app called tor pro.
It can datalog via bluetooth from ecu to the screen.
Search youtube torpro for more infos.
I was planning for a full write up, but it's so much work n take so much time, so i haven't done the writing, since my english isn't so good, but someo already had a full write up done, n he's going to post some pictures soon.